Posts

, , , , , , ,

Cometa Lynx V10 Long term review/hunt

by Dana Webb

 

Friday evening I packed the Jeep with several days worth of supplies as the following morning Marley and I would head several hours into the remote mountains of Southern California. About 8 months ago I did a field review of the .22 Cometa Lynx V10 thats distributed by Airforce International. Since I had done the first field review Airforce was kind enough to let me keep the rifle to continue using. As soon as I had confirmation to keep the Air Rifle I went ahead and stripped the black painted finish off, sanded and applied several coats of durable clear semi gloss lacquer. The natural wood grain was beautiful and felt it was a shame to cover with paint. I did some minor trigger work as well as wrapping the shroud and bottle with camo tape to protect the finish as well as to quiet the gun when hiking through thick brush.


Saturday September 8th Lindsey, Marley and I headed out several hours into a familiar location although this time we would be exploring much further into the mountains than on previous trips. This area has been very dry from the lack of rain so through some work on Google Earth I was able to locate an area that looked to have a water source. The narrow dirt road went on for miles and just before we started heading down into the valley floor we just had to stop and take in the beautiful scenery.

Over the next several miles we encountered some cattle next to the road as well as many California Ground Squirrels scurrying about on the many rocks and fallen trees.

Marley was getting very excited as she knew as well as I did the area was plentiful with varmints to hunt. The fairly smooth fire road eventually became very rugged with several creek crossings, rocks and off camber turns.

After a few more miles we came to a flat area that had many Ponderosa Pines, fallen logs and an abundance of green bushes. We set up our camp where we would spend the next two days enjoying ourselves. As I was setting up the tent I noticed quite a few Ground Squirrels just around our camp sitting atop the many tree stumps and broken timber. After everything was set up at camp Marley and I headed out in a Northern direction following a small animal trail. The trail took us atop a hill that looked to be an excellent place to hunt Cottontail’s and Jackrabbit’s. We sat down next to a bush facing down through a canyon where after several minutes I ended up spotting a large Jackrabbit.

I tried to be as quiet as possible while setting up my camera that had to be adjusted for the off camber, range was 83 yards with calm wind conditions. I set up my rifle, took a breath and the Jackrabbit just hopped away like it knew what was about to happen. UGGGGGGG gets frustrating but I know after years of doing this it’s just part of the work we put into hunting and filming our experiences. Marley and I sat for a few more minutes glassing for any further Jackrabbits or Cottontails sitting in the shadows before moving on. Anytime I hunt new areas I always like to get a lay for the land and become familiar with the terrain as well as areas that may be better to hunt from. I was checking the ground and it became very apparent this was extremely active with wildlife. We found a wide variety of animal tracks, droppings everywhere as well as fresh urine in forms. Forms are the best sign that an area has large Jackrabbit populations, these are small indentations that are only about an inch deep. These are spots that Jackrabbits sit on a regular basis like clockwork, usually in the morning or evenings are best times to spot them in their forms. Marley and I hiked in a big loop for about two hours before heading back to camp, during the hike we flushed many Jackrabbits, Quail and Cottontails. Back at camp Lindsey was busy working on some Jewelry that she will be selling on her Etsy store. She made these really neat pendants out of stones she found near camp and then wrapped them with 18 gauge copper wire. One of the pendants looks like it was a lower jawbone from a Ground Squirrel, haha never seen that done before. We were all having a great time enjoying one another’s company as well as being secluded away from people and noises, this place was so nice and quiet.

After a late lunch I topped off the Lynx V10 with air, packed a few bottles of water and Marley and I headed back out into the hills for some rabbits. We took the same route as before but now having the lay of the land I knew better where to look as well as good vantage points. The sun was just about to head down over the mountaintop bringing the 87 degrees down to about 73 degrees, much better to hike in. We sat next to a large manzanita bush that overlooked a canyon with a hillside 65 yards across, great vantage point. I soon spotted some bunny ears from behind a bush moving out into the open, I unfortunately took the shot before I could situate the camera but did manage to catch marley making way to recover. This was a nice headshot and a very healthy looking Cottontail with a fairly wild coloration to the fur, almost reddish brown.

Marley carried that bunny all the way back to camp and was proud to show Lindsey what she had done, I got to say she moved really quick up that hillside to recover. She was one pooped pup by the time we made way back to camp. That evening was just beautiful, nice and cool but not cold at all.

That evening we had a small campfire that I was going to use to cook the Cottontail, I had left it on a tree stump to process and when I went to get it Marley had only left the head and foot. She ate the whole thing, guess she didn’t feel like sharing that night. We stayed up for a few hours watching the stars, was a long day and the plan was to get up early for some more.


Sunday morning I woke up to Marley whining, sounded like “Dad, get up, time to hunt” UGGGG. I made way out of the tent, got my boots on and grabbed my morning coffee drink to get me started. I loaded the pack, loaded my two magazines with 18gr JSB’s and we proceeded the same route as the day before. We took it very slow and were as quiet as can be as we made way to the top of the hill, to my amazement there were Jackrabbits everywhere, spotted at least seven of them, most were 100 yards or more away. Marley and I inched our way alongside this field where I spotted three of them moving up a hillside at 65 yards, I took a shot on one, missed and shot at the second one that was towards the bottom….THWACK right through it’s side, collapsed and rolled down the hill into a bush. Marley made a quick recovery and dragged it back to where I was sitting.

By this time it was about 8:15 am and the sun was making for some nice T-shirt weather, about 79 degrees. We headed back to camp and my plan was to hunt the Ground Squirrels that were plentiful all within 50 yards of camp. The area was covered in fallen trees, stumps and a few rocks that they had burrowed under. Marley and I sat in the shade and waited for them to come up from the holes and move about across the fallen trees. After a few minutes we spotted several that were sitting in front of a fallen tree at 68 yards.

The shot went just below it’s ear and made a very loud distinct catchers mitt THWAPP!!! It’s amazing how tough these little squirrels can be, even with a devastating blow they still will sometimes make way back down their hole.


Over the next few hours I was able to take about 30 California Ground Squirrels with the Cometa Lynx V10, I hunted all day on a single fill taking over 40 regulated shots at 30 fpe.This gun has treated me well and has proven to be a very rugged little gun. The only issue I have had in the 8 months of owning it was the magazine coming unwound and breaking. I did a search for replacements and found they wanted $75 for one. I ended up trying a .22 Marauder magazine and found that they fit a bit tightly but when inserted correctly they function perfectly. To use the Marauder magazine the single shot side pin just needed to be removed, was very simple and easy to do.

That pin is used to mount the single shot loader, with the pin in the magazine wasn’t able to slide in far enough. I think if I sanded the marauder magazine down a bit it would work even better, the way it is now I have to make sure it’s not in to far or else the bolt won’t close. This is the only issue I have faced with this rifle and am beyond pleased with it’s performance. 


I continued to take quite a few Ground Squirrels from 25 yards out to 80, they just kept popping up all around us. At 30 yards I had taken one that was moving through a pile of cut up wood, really hit it hard, enough to fling in back several feet.

The hunting was a lot easier than I’m used to, we usually have to work hard and do a ton of hiking around with only a few down by the end of the day. This was very enjoyable being able to sit in one spot and almost have them come to me haha.

We had a great day but unfortunately had to start packing up the Jeep and making our way back to civilization. I hope some may enjoy this adventure and will consider the Lynx V10 when looking for a great small game Air Rifle. I will enclose a description of what was done to the rifle to make it field friendly as well as a video. Till next time, “The best Airgun is the one your shooting”


Cometa Lynx V10 .22

  • Stripped black paint down to natural wood and applied clear lacquer
  • Added sling studs
  • Applied camo wrap to shroud & airtube
  • Adjusted trigger
  • Added more spring preload
  • Removed single shot pin for Marauder magazine use
  • Scope (UTG 3-12×44 Mini Swat mil-dot
  • Harris 24″ Bipod

Here is the VIDEO of our adventure, please help us by hitting the SUBSCRIBE button.

Love Airguns? Visit AIRGUNFLIX.COM

 

 

 

 

 

, , , ,

Airgun Ground Squirrel Adventure Hunt

With the recent wind and rains here in California it has been difficult to get away to do some hunting. My good friend Terry and I had planned to leave early Friday morning and head out to a familiar stomping ground several hours away. Terry, Marley and I had planned to stay for several days where we would scout several new areas as well as film for several upcoming videos. The night before it had rained quite heavily so I was a bit skeptical about the road situation going into the hunting area. This area is many miles off the main highway and heads into what I call an oasis in the desert.

Road heading in approx 6:45am

The recent rains had left everything green and full of life, Terry and I stopped near a large Oak Tree where we planned to site in the rifles and scout a portion of the valley for Ground Squirrel activity. This area is one of the best habitats for the California Ground Squirrel with it’s many fallen trees, rocks and hillsides to dig their holes in. After Terry, Marley and I spent some time getting the guns ready we hiked around and could hear the distant bark as well as the occasional Cottontail rabbits moving about. (out of season)The morning was still a bit cold and the sun was not in full effect, nevertheless Terry still managed to hammer a Ground Squirrel out of its hole at near 55 yards. After about an hour we packed up and moved to the area we had planned to camp about a 1/4mi North. This area had a great place to park the vehicles and spot Ground Squirrels all over the many large rock outcroppings.

We unpacked and proceeded to hike around looking for a good area to sit an eradicate them from distance.

Terry glassing for Ground Squirrels

After a bit of hiking around we settled down in a nice spot that looked to be very active, just needed to be patient and wait for them to come out.

Marley’s running the camera

It didn’t take long for us to spot several squirrels moving about and both Terry and I had our sites on several.

Terry and I were both getting connections from 55 yards all the way out to 70+ yards.

Result of a .30 47gr NSA HP to the head.

Terry and I spent about an hour or so moving along the hillsides where we frequently could spot Ground Squirrels sunning themselves on the rocks. This place was beautiful and had some pretty amazing views of the vast Oak tree covered valley below.

Terry and Marley taking a break.

After some time taking a break Terry proceeded down the hill where there were many rocks, Marley and I stayed above. After a few minutes I could hear barking and soon after the distant CLAP of a Ground Squirrel receiving a headache.

Tapian Mutant .22 at 30 yards,that shut him up.

Marley and I sat under an Oak Tree for about 45 minutes where I was able to take down several Ground Squirrels at various ranges.

A few screen-shots of the video.

Marley was having a great time hiking around with us but by this time we needed a break so headed back to camp for some water and snacks.

After a short break we decided to stick around camp and look into the nearby rocks where occasionally one would appear. I had spotted one high up on the very top of a rock outcropping at 75+ yards. I manned the camera while Terry took the shot with his Tapian Mutant.

Good shot considering the wind.

As our long day was coming to a close and the sun was going down the temperature dropped near 30 degrees making “camping” sound horrible. We both decided to pack up and head home as the night and lack of dry firewood would have been simply unbearable. We headed out the long dirt road back to civilization left with the memories of yet another successful adventure.


I hope some may enjoy this write up and be inspired to get into the field and enjoy the outdoors. Airguns have brought much joy into my life and have enjoyed sharing it with the community through video and writings. Enclosed is the video documentation of our adventure along with some bonus content regarding the Nielsen Specialty Ammo 47gr slugs as well as the Tapian Mutant bullpub. Till then, the best Airgun is the one your shooting.

WANT MORE? Visit Airgun Flix

 

 

 

 

 

 

 

 

 

 

 

, , ,

Airgun Flix Launch

In the past several weeks the Airgun community had lost many favored channels, some have been slowly restored and others may never return. This unfortunately is something we as creators will never recover from, the thought of losing our content and being restricted to what we can or cannot share with the world. I spent several sleepless nights thinking about this and finally decided to do something about it, not only for myself but other content creators. I think it’s worth more than anything to have a safe place to share, post and find other Airgunners. With the help of our very own web designer, a quick plan was set into place for the “Imperfect Airgun Community”

AirgunFlix.com was launched 3/1/2018 to satisfy the need for safe content uploading. Here your content will never just disappear all of a sudden, without any warning. Uploading videos, images and channel status is a breeze! It is based off of social media type platforms, with the airgun community in mind. This website like any other needs to be used and shared in order for it to grow and evolve into the great idea it started as. This site is free to the user and will rely on donations from Airgun related businesses to keep it running to the standards we all can enjoy. We would encourage sharing of this site to help us gain the content that will bring us all closer together. Please feel free to visit the site and sign up.

 

 

, , ,

WAR Hunting Jackrabbits

Sometime has gone by since this hunting trip had taken place but has always been one of my most memorable Airgunning trips. I had acquired a cabin in the high desert for a week so planned to spend some of it with a good long time friend of mine. Matt and I have been hunting buddies in the powder burning world so I was excited to finally get him out to try for some Jackrabbits with Airguns. Matt had never really shot a PCP before, yet is a very accomplished big game hunter. He is used to long hunts for game such as Elk, Bear, Deer and a variety of exotic animal hunts. This morning we got out to the location early with the .22 Benjamin Marauder and the Wicked Air Rifles FLEX .30 prototype that I had acquired for about a week. I went over a few things with Matt such as how to load the magazines and how to fill the gun, zero range etc,

I too brought a buddy bottle with us to fill with and I think Matt was very impressed with the simplicity of being able to fill the guns in the field. These small bottles have made my hunting adventures much more pleasurable and make venturing into the desert much more long-lasting. This particular bottle is a carbon fiber 90CI 4500 psi that I picked up from Mac1 Airguns that is perfect being its lightweight and fits into a backpack fairly easily.

We set out and almost immediately saw quit a few Jackrabbits, that .30 was making some long shots out past 150 yards. We both ended up spotting a Jackrabbit at around 90 yards and both moved in on it. The Jack started running and we both ended up connecting hits at the same time,very heart pumping and exciting. Not sure who’s shot took it down so we shared some pics with both rifles.

For me it was just about being out hunting with my life long friend and showing him what Airguns are capable of in hunting. This was such a memorable day and can only say it was one of my favorite hunts in a long time. After Matt bagging his first Jackrabbit with my Marauder I think he may have gotten the Airgun bug, I hope. After spending a little more time shooting and having lunch Matt was on his way and left with a great memory of his first Airgun hunt. I hope that Matt will join me again very soon and possibly even invest in something Air powered for some future hunts.


Today was nearing my last day of the trip so I got up super early around 5:15 am and drove several miles down the mountain and into the Desert Jungle. The morning was cool and had almost a beach breeze going on,very beautiful sunrise it was.

The area I was hiking into was a place I had found days before, it was one of very few places that offered a good field of view and had a very good overlook to hunt from.

The area I was looking down on was fairly flat with short bushes and some larger Joshua trees near the outer area. I used a laser link to find 200 yards where I sat and waited for a Jackrabbit to get into that range, really was hoping to make a long range kill today. By this time the sun was bringing them out from cover and soon the amber ears everywhere in the distance. The first Jackrabbit I encountered into my range was moving along a trail, stopping frequently, usually behind something. Hunting Jackrabbits gets frustrating because they move directions so quickly and are sometimes impossible to see, especially at 200 yards.

I sat for over an hour waiting until one finally stopped and sat coincidentally right under the Joshua Tree that marked 200 yards. Very slowly I aimed right at the top of his head at 4 1/2 mill-dot holdover and slightly to the right for the breeze over my right shoulder. I fired and could see the pellet arch down and right into his head, couldn’t hear any hit. The Jackrabbit flopped down, kicked a few times and was out like a light.

I cant tell you how happy I was, so amazing what these modern PCPs are capable of. Being that I have been using Airguns for over 30 years to hunt with I would have never imagined how far they have come in just the past several years. Days like this make me grateful to be in the “Golden Age Of Airgunning”


Day three I had arrived just before the sun came up and decided to hike out to another area that I know to be busy with Jackrabbits. Both my packs were full as I wasn’t sure how long I would be out, brought my buddy bottle, water, snacks and plenty of JSBs. The area was very sandy with rolling hills that made for good spots to hunt them from a distance. I knew the gun would shoot 100+yards easy, problem was the wind was gusting over 35 mph. My first kill was sitting at 50 yards downhill from me between two Joshua trees. The entry was right below his neck and he fell over like a sack of potato’s.

I was very pleased with my first kill of the day, the Jackrabbit was quite large too at near “11 lbs.” Kept moving towards the South where I planned to explore a different area and as I was walking could see a few juveniles running about. By this time it was getting warmer with still plenty of wind, although wind makes stalking much easier. I even shot at a few ground squirrels that were climbing through some of the fallen Joshua Trees. The desert was very beautiful and made me grateful for such a wonderful place to visit and hunt. After shooting through my magazine I decided to stop for a break and refill the gun in a big open field.

As I sat and had a smoke I could see a Jackrabbits ears moving along the grass in the next field over. “Excitedly” I grabbed the gun and slowly headed over trying to stay low to the ground as not to spook it. I was able to get within 60 yards where I felt comfortable to make the shot, it stood up on it’s hind legs and THWAPP,right trough his leg and into his chest.

At this point I was getting tired and started my loop back to where I had parked my tuck, about 4 miles away. While hiking a mile into it I came to a large field surrounded by Joshua trees with a few scattered knee high bushes in the middle, great prime spot to sit. I knew that several Jackrabbits may be hiding in this area as it was looking almost to good to pass up.

After several minutes, sure enough I spotted one and was able to use the bipod to take aim at 70 yards. I took a heart/lung shot that allowed the Jackrabbit to run for several feet before collapsing.

Over the past week I have spent some much needed time in the high desert, a place full of great hunting opportunities. I had the opportunity to be the first to shoot a great American Made gun as well as the shared memories with a great friend. Airgunning is a passion and can only hope that through some writing that I may share with others as I have been so freely given. Keep on shooting and remember, “The best gun is the one your shooting”

WANT MORE? Visit us on Airgun Flix

, , ,

2017 SHOT SHOW

We headed out 6 hours to the Sands Expo in Las Vegas Nevada where we would make our visit to the 2017 Shot Show. We were very excited to make the rounds through this very large convention center that had 3 floors of Airgun and Firearm vendors. After a short walk we made our way into the Sands Expo where we checked in and proceeded to try navigating through the mass of foot traffic. The amount of people attending this event was astounding, no doubt making it the most popular gun expo in the world.

2017 Shot Show

Our first stop was at the Airguns Of Arizona booth where we ran into Tony Roman from the popular site Airguns Air Rifles & Pistols as he was checking out  few very cool products they carry.

Tony Roman

Some of the new Daystate models were no doubt in our opinion some of the nicest Airguns of the show as they even attracted some popular faces such as Giles Barry from the Airgun Gear Show. The Daystate rifles are very well made kits that offer quality beyond anything else we had seen. The wood stocks, fit and finish were absolutely top notch.

Barry Giles from Airgun Gear Show

Daystate


Our next stop was over to the Crosman booth where we were kindly greeted by their friendly and knowledgeable staff that were happy to answer questions. I spoke with them about several new rifles such as the Wildfire and the New regulated Marauder field target.

Benjamin Wildfire

The Wildfire is essentially a PCP version of the 10/77 repeater that uses the same trigger and magazine system, but with the addition of a 2000 psi air reservoir. With a low fill up to 2000 psi it is perfect for those looking for a great gun to pair with a hand pump and at a reported 60 shots of .177 caliber pellets. The Wildfire is really going to be a good bridge gun that may bring PCPs into the mainstream market. The SBD system is Crosman’s new silencer design, which allows for an oversize baffle and maximum volume in the chamber without obstructing the shooter’s field of view.

Benjamin SBD system

This will be applied to all of the Gen3 Nitro Piston guns and we think the real reason for the design may have been to solve the cracking issues with the shroud on the older models. We really see no change in the performance of the gun by adding the SBD system other than cosmetics, strength and possibly sound of the break barrel.


Our next stop was to the GAMO booth where we were a bit surprised to not be greeted by anyone, we did spy on the new Swarm Maxxim “repeating” break barrel though.

GAMO Swarm Maxxim

The rifle is a 10 shot repeater that uses a rotary magazine that’s inserted into a slot in the top of the rifle. Each time the rifle is cocked it indexes the magazine and loads the pellet into the breech.

GAMO Swarm magazine loading port

GAMO Swarm rotary magazine

This is a great call by GAMO to create a repeating piston gun but would have loved to see it made as a side-lever design instead of a break barrel. The rifle really isn’t much different than any of the other models as far as overall power or performance, the new barrel design is a bit robust and obviously resembles a large caliber center-fire rifle.

Gamo

The great thing about the Shot Show is to see such a wide variety of Airguns and to find the good and bad in all of them.


The next booth we visited was BEEMAN where we immediately drawn to the new QB-78S synthetic stock rifle.

Beeman QB78S rifle

The QB-78S is an updated synthetic stock version that is designed to allow the use of a bipod, flashlight or laser. The gun is not changed other than the stock and may offer a little more versatility to some of you tinkerers. These QBs are great little guns for the money and no doubt will continue to be top sellers to the entry level and veteran Airgunners both.


After a little more browsing we made out way to the EVANIX booth where we were kindly greeted by Siyoung Lee the managing director of EVANIX. He was happy to show us all of the great guns they had on hand including the new very lightweight semi-auto bullpup.

EVANIX bullpup

The new semi-auto models use recycled blowback to automatically cycle the magazine and load the pellet. Evanix will be the first to incorporate recycled blowback into a modern tactical design.

Evanix bullpup

These new rifles are extremely lightweight and shoulder very well with great fit and finish. The innovation that goes into these guns is very advanced and no doubt is a stepping stone for many other companies in design. The REX pistol was a very neat little gun that looks to offer many features that any small game hunter would be really happy with.

Evanix REX pistol

Overall I have to say that EVANIX has really hit the market this year with some serious innovative products that I think unfortunately were overlooked by a few other hypes. We however will have our eye on them and hope to report some further reviews down the road.


Our next stop was a visit to see the new KRAL ARMS line of rifles that are newly imported from Turkey. These are the Puncher Breaker bullpups that are a bit crude in overall appearance but do offer some good features in .177/.22/.25 calibers.

Kral Arms puncher breaker

Some of the rifles are very sharp looking and the wood looks like fair quality for the price these rifles are going for. The one thing we noticed about the Puncher Pro model was its similar design cross between several guns such as Daystate, Evanix and Hatsan.

Kral Arms Puncher Pro

Kral Arms rifle

The overall fit and finish of these guns is not super and feel like the want of comparing it to a very very nice Hatsan. The Puncher EVO does have some nice bling to it along with some very pretty wood stock designs. I think we will be seeing a ton of these rifles in the next year and can see Kral Arms being a great competitor to the Airgun market.


Our next stop was to check out the Ataman line of rifles that too have been a fairly new import from Russia. They were originally known for building high quality Olympic rifles and have carried the tradition of bringing some new age technology into these rifles. The M2R bullpups and compact rifles are pretty sharp looking and offer some fairly impressive performance. All the models offer built in picitany rails along with good sturdy stocks offered in wood and synthetic.

Ataman M2R

Ataman M2R synthetic stock

The Ataman’s are high end guns but can see some improvement in making some of the edges a little less sharp. The side-levers and magazines are top notch and look as though they have been made to perform and last. These guns are hunters and have a great reputation for being built by the people who use them.


Our next stop was the Hatsan booth where we were very kindly greeted by the ever knowledgeable Cecil Bays from the popular YouTube channel AirGun Scout

Hatsan rifles

Cecil was happy to show us several of the many new models and we were able to get all the information we needed from someone who uses every single model. The newest model is the Bullmaster, a semi-auto bullpup that comes in .177 and .22 and has a 500cc bottle that offers a good amount of shots. The guns semi-auto operation is completely air operated and supposedly is a much more reliable and efficient way in design than some other kits offer.

Hatsan Bullmaster

The gun is very heavy as much all Hatsan’s are, still we can give credit for some creativity in design. The new magazines are surprisingly very well made and all seemed to fit very well.

Hatsan Bullmaster magazine

The Nova may have been a favorite as far as looks but have to say that its very hard to get around the weight of these guns. We think Hatsan needs to lower the overall weight of these guns and spend some more time on the finished metal.

Hatsan Nova

Most of the guns were all very robust and had some design features that are really difficult to make sense of. The fact that Hatsan is putting out so many new affordable models is great in the sense it offers something for almost any application. If Hatsan spent some more time on one rifle and raised the quality of the materials and QC we may see a huge step up because they do have the capability. Will they do it is the question?


The next stop through our massive wave of people was the UMAREX booth where we planned to look at two new models that have really been turning some heads. The first gun we looked at was the Umarex Gauntlet entry level PCP that is planned to retail for $300, a great value for the money.

Umarex Gauntlet

The gun will be offered in .177 and .22 and features a 13-cu regulated Ninja bottle that fills to 3000psi and can easily be filled with a hand pump. They claim 60 shots at 900 fps in .22 and 70 shots in .177 at 1000 fps. The magazine is near identical to the Marauder and self indexes each time its cocked.

Umarex

The comb is adjustable that is a very nice feature along with a shrouded type barrel that is claimed to quiet the gun considerably. The only thing that would have made this gun better would be picitany rail instead of the dovetail. Overall this looks to be a winner of a rifle and tough to beat for the money. The next gun we looked at was the new .50 Hammer that is very boldly claimed to achieve 700 fpe in a 3 shot repeater “pump action”.

Umarex Hammer

This rifle is no doubt very innovative but still very skeptical to being able to achieve the power level claims. ” The Umarex Hammer is a 700 ft. lb. 50 caliber PCP rifle in a compact configuration that will shock airgun hunting enthusiasts with its innovative approach of packing multiple shots with lots of power into a modern and rugged rifle that’s easy to carry and use.” ?? We are definitely shocked. The gun uses a stripper type magazine that moves to the side to load each slug into the chamber.

Umarex hammer magazine

The gun was showcased with a new Umarex ARX ammo that is essentially a sabot type that’s popular in the muzzle-loading world.

Umarex ARX

The Umarex staff was not able to answer many questions such as ammo weight or air capacity for this rifle. The barrel looked to be near 48″ long with some sort of carbon fiber sticker type wrap on it.

Umarex hammer

The thin walled, untensioned barrel may prove to be a serious problem with harmonics when producing 700 fpe. When asked about accuracy the quote was 2″ at 50 yards, good enough for a hunting gun?….The gun looks as though it may be using a large plenum that is housed somewhere near the back of the buttstock that may explain its ease of cocking. A heck of a hammer spring would normally be needed to put out such high numbers. The best guess is this gun may produce high numbers but with only one shot and several using a lightweight conservative slug. The gun does have a curb appeal that includes AR furniture, picitany rails and a fairly lightweight to it. Without seeing more than just a few prototypes we can really only speculate on weather or not the hype is all true or if its just a brilliant way to achieve some much needed publicity. Umarex did bring a good show and does look as though it has created a winner with the Gauntlet model.


Our last visit of the day was to Predator International where we met and talked to Richard Dixon.

Predator International

Richard showed us a few of his new lead free GTO line of pellets that look as though they are a great step in lead free technology. We are a California based company where many of our hunting areas may soon require a lead free alternative due to changing laws. Predator International is on top of the game in providing exceptional products for hunting and target practice.

predator international

We helped ourselves to a few stickers and had a good chat with Randy over at RL Airgun Supply  who seemed like a great guy who enjoyes the sport to its fullest.


The 2017 Shot Show was a great visit and found it as a valuable tool in being able to interact with the companies on a more personal level and to see the faces behind the media that promotes them. The goal for this trip was to make some connections and to try to share some serious truth as to what was seen in the light. All that was mentioned is just our own opinion and applied using the best facts that could be gathered, hopefully it can be taken as helpful.

WANT MORE? Visit us on Airgun Flix

, ,

Three economy pistols under $100

The need for high end Airguns is always there, but what about for those times you just want to have some fun on a budget? We have found three pistols that offer good value for the money. Over the years we have gotten our hands on a wide variety of BB and pellet pistols and have found them all to be great fun. The nice thing about using BB pistols is they are a bit more economical to shoot along with being easier to pack into a bag and off to your favorite shooting spot. Over the past several years these pistols have become much more realistic in mimicking the function of a firearm. The three pistols we are showcasing are just a handpicked look at whats available to the consumer and we have found them to be nothing more than fun. All three are intended for plinking and not really suitable for any type of hunting, and as always we recommend using safety glasses.


The first gun is the Brodax revolver made by UMAREX. The Brodax is an air-powered revolver featuring futuristic styling along with dual Picatinny rails for mounting a red dot sight, laser or flashlight. This pistol is mostly all lightweight polymer besides the internal parts such as the trigger and hammer. The CO2 capsule is concealed in the frame of the grip as most other similar pistols, and a hex tool for tightening the capsule is integrated into the grip plate to prevent you from losing it. I really like the fact that the safety is conveniently  placed at top of the grip behind the hammer. The pistol came with three 10 shot rotary magazines that are very simple to load with BBs and easily slide in from the side of the fixed cylinder.

Umarex Brodax bb pistol

This pistol is really difficult to beat for the price point considering the features it includes. We tested the speed and were pleased to find it getting very close to the advertised fps of 375 fps and as high as 392 fps. The fact that accessories can be mounted makes the gun a bit more user friendly and fun to use. This gun wont win any precision shooting matches but has enough to put down some cans at 20 yards along with a good amount of shots per cartridge at around 55. Overall this is a really fun pistol that should give anyone a fair amount of enjoyment without breaking the bank.


The second pistol is the Smith & Wesson 327 TRR8 Revolver made by WinGun.  This is a fairly realistic BB revolver that has some good weight to it adding in the realism. To load the revolver you swing out the cylinder where you load the 6 included shells that are each individually loaded with BBs. To remove the shells the gun has a fairly well made ejector rod that’s very similar to a real firearm. The revolver has a 5.5″ barrel and textured plastic grips. This would be a good gun for maintaining firearm proficiency without the cost or inconvenience of going to a range and the cost of expensive firearm ammo.

Smith & Wesson revolver

We shot this gun over the chrony and found it to be fairly consistent at 400 fps as the company has stated and even as high at 410 fps. A few things noticed were the barrel had a slight wobble and the grips could have been designed better as far as removal to insert the Co2. This gun works both double and single action and in honesty could be a bit smoother. The open fiber optic sights work very well and the gun seemed to have fairly good accuracy for a BB pistol. The TRR8 is a tactical pistol and does accommodate a dot sight very well although the rail can be removed if desired. If your looking for a fun, realistic pistol that has features that are close to a firearm this is a good pick for the money.


The next gun and possibly my favorite is the 250XT TAC-BOSS made by HATSAN.  This pistol is an obvious clone of a Ruger MK111 and will say its fairly close in function and feel. The gun has a very sturdy feel being it is nearly all metal excluding the grip frame, grips and the fiber optic sights. The magazine in this pistol drops down just as the real firearm and holds 17 BBs in a stack along with housing the Co2. The latch to the magazine is a very realistic clone of the Ruger, also adds good detail to the function and use of the pistol.

Hatsan 250xt tac-boss

The TAC-BOSS has a beautifully fluted barrel along with the added detail of the side ejector (non-functioning) and a disassembly lever on the back of the grip that does function in removing the bolt. The safety is on the left side of the frame and easily applied with a flick of your thumb just as the Ruger itself.  The pistol is double action but unlike others this one seems to be fairly smooth and light with a fair amount of over-travel that did take a little getting used to. This gun feels powerful and was shooting at the 430+ fps that was claimed on the packaging, with several shots going over 440 fps. Overall this may be my favorite BB pistol as far as ease of use and efficiency in its Co2 consumption, getting nearly 60+ shots per cartridge.


The amount of Air Pistols on the market now days can make it difficult to decide on one that’s right for you. I always try to look at where the good outweighs the bad, coupled with value, function and durability. The three pistols we have featured are just a few examples of what can be found for under $100 and may offer a good amount of use when properly cared for. Over the next year we will be looking at several budget minded Airguns that will offer the consumer a good value for the dollar.

WANT MORE? Visit us on Airgun Flix

 

, ,

The American Airgun Revolution

The Airgun industry is flourishing here in the United States and many have called it the Golden Age for our sport. Many new manufactures are sprouting up across the states, some new and some that have been around for years. Over the past several years I have seen the market for airguns soar higher than before and with that comes ingenuity and growth. The European airguns have been on top of the high end market and I feel as though us Americans have just as much to offer as far as quality craftsmanship. My goal is to show that you don’t need to look overseas to find quality and performance, we have that right here at home.

In no particular order the first company I wanted to acknowledge here is Mac1 Airguns that has been around for over 80 years, 30 of those ran by Tim McMurray. The Mac1 legacy has set some tall standards for quality, craftsmanship and performance. Tim McMurray has earned a reputation for making accuracy and he could not be more pleased about that. “Pushing the envelope is what makes it all so fun I can hardly believe it has already represented three decades of my life as owner. I know how lucky I am to be able to compete with and build these fine airguns. It is icing on the cake I’ve shot fairly well for the last year. Enjoying these guns in a competition environment is exciting and satisfying.” I have gone to quite a few Airgun shows, competitions etc, and Tim is always just one who is always willing to give advice in hopes to help someone succeed.

The Hunter BR is the Ultimate Benchrest Airgun. Barrels are between 24 and 25″ long and all but the usable rifling at each end has been removed. The rear 6″ of this barrel is cut down to around .630″. It sports an American made 6 groove cut rifled barrel made
to Mac1 specs with 1 in 24 Twist Rate (Custom Twist Rates Available). If you wish to play with the Big Dogs you need to go with the good barrels or hope you find the 1 in a 100 barrels made to production standards that winds up exceptional. American barrel makers are the best in the world and we now have a number of them trying their luck in the AG arena. That is a very healthy thing for AG BR and AG accuracy nuts in general.The combination of ultimate build quality and great Airgun Barrel gives these fine rifles the kind of accuracy championships are made of. A plastic hard case is included along with the necessary bolt on parts to set the gun in a proper Bench Rest and bags. Tubes can be 24. 26, or 28″ long in black or clear. Accessories fill adapters and scope mounts are extra. You can have the base plate, tube plug, butt plate and receiver matching color in red, blue, clear or black. This configuration is an upright rifle that the action is inline and grip at Bottom Dead center with Scope rail at Top Dead center. This makes for a more conventional BR gun. Mac1 Airguns


The second company I want to discuss is Wicked Air Rifles, a company that has been around for awhile and too well known for tuning Marauder rifles. Travis Whitney and Jim Gaska have created the FLEX line of rifles that are proudly made in USA and have achieved a very unique market for hunters. I have watched and admired this company grow and explode in the market place as they have some very unique, user friendly rifles and pistols.

These guns are very sturdy looking and the frame is a single piece of aluminum that uses AR furniture. Each gun is hand assembled and tuned to customer satisfaction. Wicked Air Rifles pride themselves on service and will go above and beyond to work with the customers needs. These guns have a rail system that allows easy adjustment of accessories such as a bi-pod or go pro camera. It’s a side bolt design with retracting bolt to move out of air path. No bounce hammer and high flow valve. Changing springs and power adjustments are easy in that the average Joe can work on without difficulty.  The rifle can achieve 20-200 FPE  (depending on caliber selection) Adjustable power levels. Timney Calvin Elite 2 stage trigger group, Carbon fiber bottle, Fully floating Tensioned barrel. Made In The USA!!! Wicked Air Rifles


The next company that holds a special place in my life and too has given me a true look into the Airgun world is American Air Arms. They are mostly known for the Slayer Big Bore Bullpups and Rifles. Founded by Tom Costan, an engineer, avid airgunner, and airgun hunter with a love of all shooting sports. These PCP Airguns are completely and proudly made in the USA with nearly 100% American made materials! All parts (except barrels, grips and bolts) are engineered and manufactured in their own facility using state of the art CNC machining centers.  In-house manufacturing allows them complete control over the quality of they’re product. The designs always start from a clean slate and are never just another example of the industry standard. They are engineered to meet a specific vision, purpose, and performance goals before any chips hit the shop floor. When the vision and purpose are clear, the performance goals are analyzed and found to be reasonable and attainable, only then can the actual design begin. This philosophy is what makes their guns lean, clean and gives them the exceptional effectiveness, performance and purpose they are known for.

Some of the noteworthy features of the EVOL are: built in 25MOA, regulated, shrouded and tensioned Tj Enterprises barrel, integral moderator, indestructible side-lever action, 7-9 round magazine (depending on caliber), Match quality two stage trigger (adjustable in every way), and 100% made in the USA!  All calibers have “metal” magazines designed to accept polymags without modification. American Air Arms has described quality as: Excellence in engineering, reliability, precision, purpose and performance.  Quality cannot be obtained without understanding the limitations of manufacturing with modern technology; every American Air Arms Airgun is a combination of vision and technology combined with passion for old world craftsmanship.  An American Air Arms Airgun will exceed  expectations, provide exceptional service, pride of ownership and one that will be shared with future generations. American Air Arms


Our last company is RAW Rapid Air Weapons a company that has set a huge name for itself in quality and craftsmanship. Rapid Air Weapons LLC was formed in 2006 as a supplier of  Precision Air Rifle components and accessories, today they manufacture, as well as supply high quality components and products for the shooting industry from their factory using the latest in CNC multi axis machines. They take building rifles extremely serious, from very early on parts are inspected at each stage to ensure they meet expectations on quality. Throughout the building stages everything is hand inspected before being installed and assembled up into a finished rifle. Specialist tools and gauges check barrel alignment in relationship to the action and scope rail, if it doesn’t pass they’re strict tests it will not leave the factory.  Having over 28 years manufacturing and design experience at Theoben their company CEO Martin has the most experience in the business when it comes to Theoben Products, with this extensive knowledge gained over decades they are able to offer some great products.  Rapid Air Weapons has an impressive line of precision Air Rifles and products manufactured in the USA and an even more impressive collection of trophy’s and medals won by users.

This high power model comes regulated and fitted with a quick fill system with an incorporated pressure gauge, powering the HM1000 is a 480cc air cylinder and a high quality German match grade barrel, finished with an carbon fiber barrel sleeve and integral carbon fiber moderator or barrel weight where required, the rifle comes equipped with a multi shot magazine or it can be single shot loaded, machined into the action is a new style picatinny rail with 22 MOA to give the shooter added ability to zero at longer distances, both picatinny and weaver mounts will fit. The trigger is a fully adjustable sporting version of our TM1000 target trigger with an added safety catch, the stock is made from laminate or walnut and hand oiled for weather protection and fitted with an adjustable butt pad and stippled for a secure grip while in the aim. All aluminum parts are coated for protection and the internal components are hand finished, hammer and trigger parts are hardened and polished for extra smoothness in reloading as well as making for a cleaner firing cycle, the sidelever linkage and bolt have been hardened ready for a lifetime of work. Rapid Air Weapons


The four companies in this read are just my own hand picked example of whats available to the American consumer and shows we don’t have to go European to find quality. For myself I enjoy shooting all types of Airguns but over the past few years have learned I prefer the quality I can find at home in the USA!

WANT MORE? Visit us at Airgun Flix