Posts

, , , , , ,

Seneca Aspen Field Review

Several weeks ago I received a package from Air Venturi containing the new Seneca Aspen PCP rifle. This is a rifle I had some great interest in as I felt it was something different and unique from other Airguns. The Seneca Aspen is a very innovative Air Rifle that is built with a pump integrated into it, this means we always have an available air source to keep us in the field. The Aspen is what I would call a “survivalist” type Airgun, great for long extended trips where weight may be a factor. Here are some factory stats on the rifle.

Seneca Aspen PCP Air Rifle, Multi-Pump PCP 

  • Pre-charged Pneumatic (PCP) Air Rifle with built-in pump
  • Side Lever Action
  • Two Stage Velocity Adjustment 
  • Fires up to 17 Shots with 40-60 Pumps
  • Two-Stage Adjustable Trigger
  • Synthetic Stock
  • 250 BAR / 3,600 PSI Fill Pressure
  • On Board Pressure Gauge
  • Automatic Overpressure Air Release
  • Manual Safety
  • Fully Shrouded Barrel
  • Rifled Steel Barrel
  • Pump Lock Carry Handle
  • Overall Length:  43.3 Inches
  • 11mm Dovetail Rail
  • Includes 10-Shot Rotary Magazine 
  • Includes Fill Probe
  • Includes Single-Shot Tray
  • Includes 4×32 AO Scope
  • Weight 8.0 lbs

Two Stage Velocity Adjustment

  • .22 Caliber: Low Power= 700 fps, High=900+ fps

As one of the most innovative options in PCP airguns, the Aspen uses an integrated pump to fill its 3,600 PSI/ 250 BAR cylinder. Once filled, you can shoot up to 17 shots with 40-60 pumps. Pumping the Aspen up is quick and easy, only requiring about 28 lbs of effort at 3,600 PSI. Once fired, your shots can reach speeds as high as 900+ fps in .22 caliber. The Aspen features a two-stage velocity adjustment to keep you firmly in control of your shot’s power. With a flick of the dial, hunters can switch to high-power for devastating knockdown shots and be ready for the next shot 5-6 pumps later. With its dial set to low, target shooters can take almost 20 shots before you need to pump again.The Aspen features a two-stage trigger to cater to preferred pull weight. These features alone make the Aspen worth the $400 price of admission, but what if you already have a fill source? If you want to fill faster, the PCP still includes a Male QD probe with standard foster fitting to fill up your airgun the old-fashioned way. With adjustable power, adjustable trigger, magazine, single shot tray and a 4×32 AO scope, and no fill source needed, the Aspen is an attractive and affordable option for PCP airgunners new and old.


The Aspen came packaged very well and included instructions, spare o’rings, fill probe, magazine, single shot tray, silicone oil and scope. My first impression was the stock that was obvious plastic and had a “hollow” type feel to it. I shouldered the rifle and was happy with it’s weight distribution, it felt very natural and the pump handle made a nice rest for my hand. The rifle felt very solid and the metal finish was very well done, especially the shroud.

I went ahead and mounted the 4X32 AO scope that came with the Aspen, this is a fair scope for short distances but difficult to use for precision shooting beyond 30 yards. The rifle thankfully does include sling studs on both the buttstock and forend that make the gun ready for a sling. I liked how the stud on the forend can be mounted to either left or right side depending on how you carry the rifle. The following morning we would visit the range to sight in the gun and do some chronograph readings.


Today we visited the local range where we tested several different types and weights of pellets, for accuracy as well as to chronograph the rifle on high power. We tested the speed using the .22 H&N Sport Field Target Trophy’s that come in at 14.66 grains. These are great pellets, and through the years have found they work well in the majority of the .22’s I have field tested. We first tested a 10 shot string at a 3000psi fill pressure.

The 3000psi fill brings the gun to about 22fpe using the 14gr pellets, these are fair numbers considering the small size of the Air cylinder. Next we would fill the gun to the maximum pressure of 250BAR or 3600psi for our next 10 shot string.

With the 3600psi fill we are now reaching close to 30 fpe, a great amount of power for hunting most all small game animals at extended ranges. We tested the accuracy at 35 yards, because the 4X32 AO scope was a bit underpowered to make precision shots at 50+ yards. No doubt with a scope upgrade this gun is capable of great accuracy, still I used the gun just as it came from Air Venturi. 

H&N Field Target Trophy .22 Cal, 14.66 Grains, Round Nose

JSB Match Diabolo Exact Jumbo Heavy .22 Cal, 18.13 Grains

JSB Redesigned Monster Pellets .22 25gr


The 25gr JSB redesigned pellets worked very well in the gun although they were going considerably slower, and not shooting very flat. I was pleased with how all three shot, but still felt the 14gr H&N’s may be the best match for flat shooting out in the open desert. The single shot tray as well as being able to fill the gun with my SCBA tank made the range a whole lot more enjoyable. The gun was easy to fill, but the only thing that got annoying was having to remove the small rubber dust cap from the fill port. My large fingers had a difficult time reaching in to remove it, a small flat blade screwdriver may have made things go faster.

After we had finished our work at the range I left the Seneca Aspen with 3000psi to check for leaks the following morning.


The following morning I woke up at 5:30 am and proceeded into the shop to check the gun for leaks, and to pack the Jeep with all the gear I would need for my several day field trip. The Aspen had held the 3000psi overnight just fine so I loaded it into the case and into the Jeep. Our drive would take us several hours North through the remote mountains to a familiar vast wilderness. This area is very remote and always requires great caution due to weather conditions and road hazards.

 

The weather was cold with rain clouds rolling in towards the West, at this point I had expected the hunting to be very slow over the next few days. I unpacked the Jeep, set up camp and loaded my pack with all my camera gear, water, snacks etc,

The area we were hunting resembles East African terrain. It is home to animals such as Pronghorn Antelope, Tule elk, Fox, Coyote, Mountain Lions, Wild Pigs and a wide variety of birds. The area is vast and consist of approx 38,900 acres of huntable area, one of the more remote locations I frequent. Marley and I hiked a bit North from camp where we immediately spotted one of the many large Jackrabbits that frequent the area, most we encountered were well beyond 100+ yards and well out of reach of the .22 caliber.

  We hiked for several miles up over a mountain where we finally made our way down through a steep ravine hoping to flush some Jackrabbits. I had taken several shots along the way at ranges no closer that 80 yards. The rifle carried very well and I much enjoyed using the pump arms locking handle to carry the Aspen with. The 8.0 LB rifle really shined in conditions where I was having to climb steep hills and switch my carry from sling to the handle. 

Marley and I came down a steep mountain that fed us into a huge open field with sparse vegetation throughout the hillsides. It had just rained several times in the past week so the green grass was looking somewhat like Springtime.

 The area was a great place to take a break as well as to film for the video portion of our review. I took a few shots with the Aspen, plinking at some rocks and just getting comfortable with some of my holdovers at various ranges. I found the rifle to be very easy to pump from 3000psi to 3600psi, the key is to go slowly and smoothly as to not allow the pump to heat up. It’s important to go slow, this will maintain the longevity of the o’rings.To fill the rifle from empty to full takes about 60 pumps, once the gun is to 3000psi it becomes very easy to get to 3600psi. I found that taking several shots and then pumping about 13 times would keep the power up.

  After a few hours of hiking around marley and I headed back to camp to have some lunch and to find a good location to take some scenic photographs of the Seneca Aspen.

Marley and I headed out again not far from camp and were able to take several shots, one that was a near miss at 83 yards.

It can get pretty frustrating sometimes when we are trying to “film” the excitement of a hunt, people like to see success more than failure. When hunting we never have a guarantee, all we can do is try our best and to enjoy the experience and relaxation of the location. By this time it was getting late and the temperature was dropping as the evening approached. Marley was getting a bit grumpy, guess she didn’t have enough action and she was exhausted. I put her to bed and made a nice campfire to stay warm for a few hours.

 

A few hours later it started raining fairly heavy, making it apparent we may move to a different location the following morning.


The following day I packed up the Jeep and decided to head home due to the rain making for very poor hunting and filming conditions. Several days later Terry, Marley and I traveled to another remote location in the high desert near Mojave. This area has a good variety of small game to hunt such as Ground Squirrels, Jackrabbits, Cottontail and Quail. We arrived to the location very early with the temperature being in the high 40’s, the plan was to hike the steep hillsides as the sun came up. We parked the Jeep in a very rocky area, a place we call “The Hills Have Eye’s” from past trips. 

Terry, Marley and I hiked along this small animal trail that took us alongside of a large mountain, as the sun came up the Jackrabbits and Cottontail usually start moving about. Terry and I both took several shots on a few Jackrabbits, it was still a bit dark so spotting them was difficult. Marley flushed one from a nearby sagebrush and nearly grabbed it by the back legs. She was so happy and excited to be out with the boys on this great morning. As we circled back I had spotted several large Jackrabbits scatter, two of them stopped high above me on the hillside at 85+ yards. I moved as slowly and quietly as possible getting myself just in front of a large bush at 75 yards. 

 I took the shot that put the 14gr H&N right into the Jackrabbits chest, that ‘THWAAAP’ echoed through the canyon like it got hit with a baseball. Marley and I moved as quickly as we could up the side of the steep hillside to recover our kill and to relax in the shade. Terry and I both were surprised how quick that large Jackrabbit went down!!

It was a great morning so far, very pleased with my 75 yard kill, good size one too!


After a short break we continued along the trail and circled back towards the Jeep where we had planned to drive down lower into the valley and check for Ground Squirrels.

 

This area is normally crawling with Ground Squirrels in the Spring and Summer months but I had expected to see a few adults out and about considering how nice the weather was.

I had decided to load the magazine with some NSA .217 19gr slugs, wanted to see how slugs would shoot out of the Aspen.

We headed along a cattle trail that ran parallel with a dry creek bed, trees, fallen logs and rock outcroppings were abundant here. 

  We hiked for a bit and saw very few Ground Squirrels, the few we did see were extremely skittish and difficult to get close to. Terry, Marley and I sat under a large Oak tree and waited for several to pop their heads out from under a fallen tree.

  

After spending about an hour or so in several spots we had concluded this area had very little action, my guess was the temperatures were still much to cool for busy activity. We moved back to the Jeep where we set up a few things to shoot at 35 yards. Terry was excited to get to shoot this really cool rifle.

Terry was impressed with the entire rifle, especially the trigger that I have concluded is one of the best out of the box I have field used. The Seneca Aspen is a great gun, has excellent power, sidelever is very smooth and the ergonomics such as the pump handle work very well to the entire package. After lunch we packed up the Jeep to head down the long road and head back towards home. Turned out to be a great day just to get out with Marley and my good friend Terry.


Later that evening I wanted to document a bit of preventative maintenance to the Aspen in video form. I went ahead and removed the shrouds end cap to see if the shroud may have had any baffles or any form of sound deadening material. 

The shroud does not have any baffles between the 4″ muzzle and end cap. The Aspen is very quiet but I can see how some baffles can easily be fitted to quiet the gun even further. (I personally see no reason to quiet the gun further) Next I looked to the small air tube just under the shroud, it has a knurled cap that can be removed. What is this? The direct answer for this is to service the pump tube at the factory and serves no direct purpose to the end user. My guess is it may be to remove the tube from the air tube assembly. Moving on I wanted to show the points of lubrication that include the breech o’rings, the Aspen includes a small bottle of silicone oil. We will use a Q-Tip to apply a small amount of silicone oil to the breech o’rings.

Next we will apply some silicone oil to the pump o’ring, this hole is visible when we open the pump handle arm all the way.

This is a good time to lubricate the pump arm linkage as well as to brush off any debris that may have accumulated on or around the pump area. After the rifle is broken in after about 500 shots it’s necessary to increase the hammer preload. The Seneca Aspen comes with a small allen wrench that fits in the small hole in the stock just behind the breech.

After the rifle is broken in the hammer spring will start to settle, to bring the power of the gun back up we turn the the adjustment 1 full turn “clockwise”. I would not recommend going further with the chance of either spring failure or causing binding issues. This adjustment would come in great for those who have a chronograph and want to “fine tune” the rifle. Modifications and adjustments beyond what’s in the user manual will most likely void the warranty. 


My time with the Seneca Aspen has been great, this truly is a worthy field gun and one that would impress even the high end Airgun snobs. This rifle has passed the test of being rugged and I feel with proper care it’s something that will last under heavy use in the field. Enclosed are my final honest thoughts on this rifle.

                   PROS

  • Great power
  • Shoots a variety of pellets well
  • Great metal finish
  • Smooth solid Sidelever
  • Great trigger
  • Lightweight
  • Handle is very useful
  • Sling studs
  • Inexpensive magazines
  • Solid shroud and barrel band 
  • High/Low power setting
  • Great safety
  • Can pump or fill with a tank 

                  CONS

  • Scope, difficult to use at longer ranges
  • Stock feels hollow
  • Cover for probe is difficult to get off

Overall this is one heck of an Airgun, perfect for a first PCP being it has the pump built into it. The sidelever, trigger, metal finish and high/low power settings are features found on guns costing near three times as much. People may complain about the stock but the reality is that it’s very durable and weather resistant. As mentioned, my only real complaint is the scope, the accuracy of the gun is well worth the upgrade in my opinion. Even without the scope the gun is well worth $400. For an out of the box $400 PCP this is no doubt one of the best performing rifles I have ever field used, perfect survival rifle being independent with air and shooting a variety of pellets well. Air Venturi was smart to brand this rifle and I see them selling a ton of them over the next year. From an Airgunner that likes to tinker and tune I can see this being a winner as well, capable of much more than it gets out of the box. I hope this review may help others decide on this rifle as their next purchase. Enclosed is the review in video form as well as the link as to where to buy it. Remember “The best Airgun is the one you’re shooting”


     


Want more? Visit the forum at AIRGUNFLIX

 

, , , ,

RX Target Systems Review

Over this past month we have had some great time spent with a new Airgun product manufactured by RX Target Systems. These are very unique targets that are brilliantly made right here in the USA by a friend of mine David  Bitkowski. Over the past year I have watched the progress of these target systems develop through post made in the many Facebook groups we’re both a part of. I enjoyed the enthusiasm David put into making these target systems. I soon wanted to reach out to learn a little more about him and this product he developed. Through our several emails and phone conversations he was kind enough to send us one here for us to review. To look back as to how David became involved in creating the RX Target Systems we will share this short story written by his daughter Melissa:


“My name is Melissa Bitkowski. I  am a third grader in Rossford, Ohio.  In March of 2017, I was diagnosed with a very rare chronic inflammatory disease called GPA, (Granulomatosis PolyAngitis). GPA occurs in 3 and 100,000 and mostly in older people. GPA  commonly affects the lungs, sinuses, and kidneys, and is caused by the immune system attacking the blood vessels . My sinuses and lungs were ok; but my kidneys became very sick and I had to use dialysis three days a week to clean my blood out, sort of like an oil change. We were told that the damage to the kidneys is called “Crescentic Glomerulonephritis” which happens to 7 in a million people with kidney damage. It  caused high blood pressures, seizures, and anemia that needed managed by medicine. There is no cure. Doctors treat GPA by making the immune system “go to sleep” or into remission using medicine so it stops attacking my kidneys . However, the first choice of treatment failed. We were told two thirds of my kidneys were unrecoverable. The second treatment put me in remission, but my kidneys still failed. I received a kidney from my Mom’s cousin which saved my life. Now I’m on anti rejection meds for the rest of my life and close monitoring by my doctors. This has been a very rough time for my family who has given up everything to help me live the new normal. My Mom has left her job of 15 years to take care of me, making sure I got to my dialysis appointments 3 days a week and doctor visits at CS Mott Children’s Hospital in Ann Arbor. My dad took money from his retirement and is working a lot of hours to help pay the bills. Dad started making Airgun Targets to keep his mind off the stress and to help others get better with shooting. He also wants to help support other families who have a child in Dialysis. Please consider supporting I our business . My  family and I thank you for taking time to read our story.”

After reading this letter it became apparent that it needed to be shared for spreading the word, and to hopefully play a small part to help out. David is a very dedicated family man and has spent countless long hours in his garage putting together these fine target systems.


About the RX Target Systems

FROM SKETCH TO FINAL INSPECTION, EVERY EFFORT IS MADE TO ENSURE A QUALITY PRODUCT IS PRODUCED. THOROUGH RESEARCH WAS DONE PRIOR FILING FOR A UNITED STATES PROVISIONAL PATENT, 60207-US. THE DESIGNS ARE ENTERED INTO AUTO-CAD THEN CUT OUT ON THE PLASMA TABLE.  THE FACE PLATES, TARGET PLATES, AND RESET BARS ARE THEN CLEANED OF THE ROUGH EDGES, AND WASHED TO PREPARE FOR PAINTING OR RETAIN NATURAL FINISH. WOOD IS CAREFULLY SELECTED AND CURRENTLY CONSISTS OF PREMIUM CUT PINE.  RUSTOLEUM BRAND SPRAY PAINT IS USED FOR ITS COST EFFECTIVENESS AND WIDESPREAD AVAILABILITY.  FIELD TESTING IS DONE WITH EACH MODEL TO ENSURE IT HANDLES THE FORCE TO WHICH IT IS RATED.

David does extensive testing of all his products to ensure they can withstand the repetitive force of Airgun use.

 KITS ARE SHIPPED ASSEMBLED WITH THE EXCEPTION OF THE FACE PLATE WHICH ATTACHES WITH TWO HEX BOLTS.  ONE KIT WEIGHS ON AVERAGE 8 POUNDS. EACH BASE IS 16″ LONG. FIELD TARGET WIDTH IS 8″ AND BULL CHALLENGE IS 6″. HEIGHT IS 4“. The RX Target Systems are available in many different styles and colors that can be used for many different shooting applications. Most of these targets are designed for smaller calibers but that may change soon as the need for something that can withstand large calibers is growing. These are very well made for the cost and was a bit surprised seeing just how well these have been built. Terry and I spend some time with them in the field and found the target to be extremely enjoyable to practice with.

Rx Bull Challenge, shown with black and white style. Standard with 1 inch bulls but can be customized to skill, down to 1/4 inch. Great for biathlon style shooting.

These targets can be custom painted directly from RX Target Systems or customized by the user. We found this camo model to be an excellent challenge as well as looking really cool during field use.


Terry, Marley and I headed into the remote mountains of Southern California to film for several videos as well as to give us a great opportunity to test out the RX Target Systems.

 Terry is a very well accomplished field target shooter and can be found on the Offhand Airgunner YouTube channel. I figured Terry would be a great candidate to try out this target as I felt it was the perfect tool for practicing for field target. We spent a good portion of the day filming as well as taking several photographs of various products. We set up near a riverbed that offered some good cover from the wind as well as a safe area for some long range shooting with a Big Bore we were testing.

Terry and I set up the RX Target System at 25 yards, we nestled it between two bushes that left a great backdrop to the target.

At 25 yards this target was a good challenge for me, especially offhand.

The RX Target System was easy to set up, we spiked it into the ground with stakes through the provided holes on the base.

The reset hinge has a nicely riveted hole that’s makes a secure place to tie the reset string. David has obviously done his homework on this design because everything works so smoothly. The major working components of this target system are protected well and stronger than they need to be to last during heavy use. Lets face it, they have to be to withstand thousands of pellets hitting them at 25+fpe. Terry had brought his .22 Tapian Mutant with the newly mounted Discovery optics scope. This is a great kit for both target shooting and hunting and is no doubt one of the most accurate bullpups on the market.

Terry made using this target look easy, doing it all offhand. I had a difficult time and found the kneeling shots to be much easier for me, you can see from the photograph I missed a few times. This is the type of target I can easily set up in my backyard to practice some improvement on my offhand skills. I can see the RX Target Systems being an excellent gift to ANY Airgunner and something that will last for years. I hope our readers will reach out to David and share his story with others, he’s a great guy and has a strong foot in the Airgun community.


We had a great time with this target and was able to gather some good video of our use of it that will be enclosed at the bottom. I would urge anyone interested in purchasing the RX Target Systems to visit Davids website or Baker Airguns who is now a distributor of these awesome targets. You can also find RX Target Systems on Facebook here.


If you would like to make a donation to help families affected by Childhood Kidney Disease in your area, contact David for help finding these locations. Here is his email:

dave@rxtargetsystems.com


WANT MORE? Visit the video forum at Airgun Fix

, , , ,

Seneca Double-Shot Shotgun field review

A few weeks ago I received two Air Venturi products, the Seneca Wing Shot and the new Double-Shot Air shotgun. These are both products of Air Venturi and arrived fairly quickly with 150 loaded shotshells and .50 Air Bolts. I had very little experience using any type of shotguns, so I was a bit excited as well as skeptical using them in the field. My expectations of air-shotguns were very low. I expected them to have low power, be heavy and have only a few inefficient shots before getting refilled. This detailed article is written as my first-hand experience using these in the field.


      Seneca Double Shot .50 cal Double Barrel Shotgun

  • Precharged pneumatic
  • 244 cc air cylinder
  • Two Smooth Bore Barrels
  • Up to 5 good shots per fill
  • 3000 psi fill
  • Male Quick Disconnect Foster Fill Fitting
  • On-board pressure gauge
  • Velocity up to 1130 fps with shotshells
  • Velocity up to 425 fps with Air Bolts (170+ FPE)
  • Velocity up to 600 fps with Round Balls (140+ FPE)
  • Thread on chokes (Easily removed for use with Air Bolt or Slugs)
  • Front bead sight (no rear sight)
  • Optional 11mm dovetail scope rail to add optics
  • Ambidextrous hardwood stock
  • Rubber Buttpad
  • Patent Pending Air Distributor allows a follow-up shot in less than 2 seconds
  • Bore Diameter: 12.47mm Barrel Thread: 16.6×18 Choke Measurement: 12.4mm The choke reduces the inner barrel diameter from .494″ to .486″

Easily the most flexible big bore system on the market: Double Shot delivers a decisive one-two punch to medium and large game with any combination of .50 caliber ammo, shotshells, and the Air Venturi Air Bolt. The Double Shot uses a patent-pending air distributor that allows you to perform a quick follow up shot in less than two seconds, through the use of a barrel selector dial. Simply load both barrels, rack back the bolt, fire your shot, twist the barrel selector dial, rack the bolt, and fire again. To sight in on your target, use the traditional shotgun style bead sight, or purchase the Air Venturi 11mm Dovetail rail for mounting the optic of your choice. This innovative PCP uses a 244cc cylinder, filled to 3000 psi, that provides 5 full-powered shots per fill. This high pressure translates to incredible velocities with up to 1,130 fps with shotshells. The options don’t stop there, as the Double Shot can sling .50 caliber big bore ammo and the revolutionary Air Venturi Air Bolt—an arrow-slinging system that can put 170 FPE on target. Each Double Shot features the trademarked etched actions and finely grained hardwood stocks you’ve come to expect from a brand that pays homage to the golden age of the hunt. Put simply, the Seneca Double Shot is a very versatile big bore PCP shotgun that doubles down on big bore power. This is a PCP shotgun that can sling .50 caliber rounds downrange one shot after the next, perfect for small game such as birds and rabbits. Load slugs, round balls or Air Bolts for large game hunts.

Check out these configurations below:

Mount up optics with the Air Venturi 11mm Scope Rail (sold separately).

SHOTGUN: Choose the shotgun option and enjoy velocities of 1,130 feet per second with either No. 6 or No. 8 filled shot shells. With consistent spreads of 12″ at 20 yards. (NOTE) Empty shells can be purchased to customize your load for various types of hunting)

RIFLE: UNSCREW THE CHOKES BEFORE USING LEAD BULLETS. Hunting for larger game? With .50 caliber slugs the Double Shot offers speeds of 600 fps and fpe exceeding 140. That’s more than enough power to take medium game with a well-placed shot.

BOLT-SLINGER:  UNSCREW THE CHOKES BEFORE USING AIR BOLTS. Arm your Double Shot with Air Venturi Air Bolts to turn your air shotgun into a hard-hitting arrow launcher!  Now more speargun than airgun, be careful not to “Robin Hood” or split bolts already on the target –they are that accurate!  Capable of speeds up to 425 FPS and 170 FPE, Air Bolts are a fusion of innovative design and incredible knockdown power.


The first day out with this rifle was mostly to just get familiar with its function as well as to get several promotional type photographs to use for this report. I took both rifles with me to make sure they both functioned and would be sufficient to hunt with. The only part of the rifle that needed assembly was the cocking bolt, very easy to install with the provided allen key. Marley and I arrived to our location high in the mountains in a remote part of California, perfect for testing these rifles. My first impression of the Double Shot was great, it’s lightweight at 7.5 lbs and has a great looking wood stock as well as good durable metal finish. I found the rifle to be very easy to fill with a standard foster fitting with a cap that snaps on and off with ease. The rifle is very well made and has a unique and robust double loading breech with a manual valve that controls airflow into each barrel.

I loaded the rifle with the provided Air Venturi #6 shot that came boxed very well, these in my opinion are great for birds, but from later experience found them to be too light of a load for rabbits.

Marley and I proceeded to hike North away from the Jeep hoping to spot some Quail, Cottontail and Jackrabbits. The rifle really carried well and had a great solid feel to it and it did not feel like 7.5 lbs at all. Within several minutes of hiking I had spotted two Jackrabbits running up the hillsides at over 100 yards away. Marley and I moved slowly into the mountains with the hopes to get some closer shots on rabbits as well as to find some Quail. We were now several miles from the Jeep and decided to take a much needed break from to 80+ degree weather. I figured we would sit in the shade for awhile and wait to see if I could spot any movement on the nearby hillsides.

After about 20 minutes of rest Marley and I continued in a large loop through the brush covered hillsides with very little activity. Marley flushed out a good sized Jackrabbit that sped off leaving a poof of dust behind, much too quick for me to even react. I had made the mistake of not mounting my camera on the rifle and was only carrying my movie camera and tripod. On the way back we flushed a large covey of Quail and I was able to get several shots on a few at 40 yards. The brush is so thick that the #6 shot just didn’t carry enough energy to get through it at that range. Our real goal was to test the rifle, see how it carries and look for performance issues. As we made our way back down the hill I made several stops to take some more photographs, as well as to enjoy the beautiful scenery this location offers.


The following day I was accompanied by my good friend Terry who is an avid Airgunner and hunter as myself. This would be his first experience hunting with an air powered shotgun as well as his first time hunting the California Quail. These birds are abundant in the areas we hunt, but are incredibly difficult to find and get close to.  Terry and I left fairly late in the morning and arrived to our location around 11:00 am, the weather was in the low 80’s with a slight cool coastal breeze. Terry would be using the Seneca Wing Shot, the single barrel version of the Double Shot. He was impressed with the simplicity, lightweight and feel of the rifle right away. We did some initial shooting with it just so he could get a feel for it as well as familiarizing how to aim it. We found that the front bead covering the target would get the full pattern on the target. The pattern was as stated approximately 12″ at out to 30 yards, great for birds and even rabbits at close ranges.

 

Terry, Marley and I headed out into this large field where we had spotted a large covey of Quail. We moved through the field with Marley zig zagging through the tall grass trying to flush some birds and rabbits.

We continued through the field in a big loop that took us into some thicker areas where we soon spotted a large covey of Quail at 50 yards. Terry and I both took shots on several that were fleeing away from us. I believe we may have hit one of them but the area was so thick that Marley had a difficult time making her way through the brush. This was the most fun I think I’ve had with an Airgun in a long time, a very unique way of hunting. The challenge at this point was very apparent to both Terry and I, super fun nonetheless.

‘Terry and I took a short break in the shade and just enjoyed being out in such a beautiful location to hunt. Terry was saying how surprised he was on how light the Wingshot was to tote around, shouldered nice and had a forearm that made good for offhand shooting.

Over the course of the next few hours we had very little luck finding any birds or rabbits, but we did have some fun back at camp. We had set up some small pumpkins at 20 yards and took turns blowing them off the log.

After looking at the damage afterwards it became apparent how powerful these shotguns were. The shot penetrated through very easily, with heavier load I’m sure they would have exploded. The rest of the day was spent doing some filming and taking some more photographs for this write up. The following week would be the Dove opener so I had planned to come back to try for that, giving me a better chance to capture something on film. When making field use videos we sometimes feel like we have to capture a kill on film. I have to remember that when hunting there is never a guarantee. We still enjoy the time out getting to hunt with some awesome Airguns.


Today Marley and I got up very early and headed back for the Dove opener, this would be another first for me. I had not really ever hunted many birds, through curiosity had been reading as much as I could on the subject as well as watching a few videos. I had decided the night before to pull apart several of the #6 shot shells and replace them with 20 Crosman Copperhead BB’s. I felt that the #6 was just to lightweight for punching through the brush as well as making longer range shots. When we arrived I tested out several that I had loaded on a tin can at 35 yards, the shot seemed to hit with much more authority. I had packed my large backpack with close to a gallon of water, snacks, as well as all my camera gear. This time I had decided to mount a small Sony HD camera to the barrel of the Double Shot, hopefully to capture the action with ease.

We headed up through a rugged canyon that had many fallen trees and tall dry grass that eventually lead us into some very thick brush. I wanted to get up into the higher elevations to get to where the Cottontail would most likely be, as well as some birds. Within about 20 minutes I spotted several Doves fly overhead and land in some nearby brush. Marley and I quietly made our way closer where I was able to take one at 35 yards as it was perched on a branch.

The shot took the Dove down fairly violently and Marley was quick to make her first bird retrieval.

Finally after a few days with little luck I felt some success, it’s tough hunting but when things like this happen it makes it all worthwhile. What a beautiful bird, I was hoping several more were around but I think we would have to work hard to find them.

Marley and I bagged our prize and headed further South where it took us through a creek and up a steep ravine into the higher points of the mountains. By this time it was close to 9:30 am but fairly cool in the high 60’s, perfect weather for hiking. As we followed a small but busy animal trail I spotted out of the corner of my eye a small Cottontail scurry under a bush at 20 yards, THWACK!!!

Marley ran to find it with me close behind, it got hit so hard that it literally drilled it into the ground. I think 20 yards was a bit to close haha! After the recovery I filmed a little as well as taking some more photographs along with a much needed water break.

After our break Marley and I continued down the small animal trail along a ridgeline that was fairly flat giving us a fairly good view in front of us. As we slowly walked I soon spotted another Cottontail sitting under a nearby bush at 30 yards in front of us. THWACK!!! Another one down with authority, I actually hit a bit in front of it, but still managed to take it down.

As we continued down the trail I spotted two jackrabbits with one leaving me a great shot, in the excitement I aimed a bit to low just missing it. Very exciting watching Marley chase the huge jack into a big circle where I was able to take a good running shot hitting just behind it. I think with some more practice behind the gun I could really get used to hitting moving Jackrabbits. This rifle is so much fun, I love it the more I use it, and have found it to be near the perfect tool for this type of hunting. Using a shotgun can get frustrating when we see a shot that is beyond 100 yards, still at close range it’s versatility is well above a standard pellet shooting rifle. Marley and I made our way back to the Jeep where I planned to film some footage with the Air Bolts.


Back at the Jeep we took a rest and had some lunch, my legs were killing me from all that hiking around. I felt relieved that I finally had something to show for all the work I put into making this field use review. I mean lets be honest, we want to be successful and show how capable the rifle can be in real life scenarios. The Air Venturi Air Bolts are .50 in size and made from a carbon fiber shaft with finely machined aluminum tips. Broadheads can be fitted but the composite points are more than adequate for any small game use up to Coyote size.

The first thing we do when using the Air Bolts, slugs, round balls is to remove the chokes from the barrel. To do this they simply unthread from the rifle, these chokes are what adjust the shot pattern. After we have removed the chokes we can now insert the Air Bolt from the muzzle end of the shotgun.

The Air Venturi Air Bolts have a small o’ring at the end of the nock, this o’ring rides on the inside of the smooth bore creating a seal to propel the arrow at optimal speed. The Air Bolt can achieve 238 foot pounds of energy, more than any conventional archery device I know of.

The Air Bolt is easily inserted in the muzzle end of the rifle with a twisting motion to get the flights to glide through the bore. I took several test shots and was astounded at both the accuracy and power of these things. I actually broke one of them because it went through my test target and into the tree behind it. The arrow had gone so deep into the tree I couldn’t remove it without breaking the shaft. These Air Bolts are not cheap, but could be extremely deadly on almost any game animal. I set up a target at 35 yards and was amazed at how accurate they could be. Even with having just open sights a scope on the rifle would be most ideal for this setup.

Over the past week I have enjoyed the Seneca Double Shot Air Rifle, it’s versatility and fun is near impossible to beat. I went into the situation a bit skeptical, but was quickly satisfied after my first shot with it. This truly is one of the funnest Airguns I’ve had the privilege to use in the field. I think with some practice one could become very efficient in hunting with this awesome piece of kit. My final thoughts are as follows:

PROS 

  • Extremely versatile
  • Great fit and finish
  • Lightweight
  • Simple design
  • Easy to fill
  • Great power

CONS

  • Need buddy bottle for longer trips
  • Cost of shot shells/ Air Bolts

I want to thank Air Venturi for sponsoring this field review and allowing me the opportunity to bring my honest review of this great product. If you like what you see and are interested in purchasing this rifle please click HERE to find the best location for you!


Here is the video documentation of our adventure with the Seneca Double Shot, help us out by SUBSCRIBING to our YouTube Channel.

Love Airguns and want more? Visit AIRGUNFLIX forum

, , , , ,

Pyramyd Air Backyard Brawler Challenge

Over the past month we have filmed several field reviews that are scheduled to be released here very soon. When we were in the field we had the honor of teaming up with Offhand Airgunner, a new channel dedicated to field target competitions, reviews, and hunting with Airguns. We filmed the entry that would be submitted to the contest put on by Pyramyd Air. Here is what’s involved to enter:

HOW TO ENTER

Order your FREE pack of Air Venturi Airgun Slynger Metal Silhouette Targets (you pay shipping & handling). Use the promo code: BRAWLER.

Once you receive your targets, take a video of you shooting down the targets with your favorite airgun, or air pistol.

Upload your video to YouTube, or Vimeo, and do the following:

  • Make sure your video description links to pyramydair.com/bb.
  • Include “Pyramyd Air Backyard Brawl” somewhere in the title of your video (Example: World’s Best Pyramyd Air Backyard Brawl Video Ever!)
  • Make note of the video URL, so you can enter it into the form below.

Spread the word, share this giveaway for more chances to win.

Contest ends November 10, 2018. Limit one entry per person. Winner will be announced the week of November 12, 2018.

All entrants will receive $5 in Bullseye Bucks at Pyramyd Air.


Terry and I set out for the mountains of Southern California to do some Quail and Cottontail hunting with the Air Venturi Wingshot & Double Shot Shotguns.

We spent the majority of the day hunting with the shotguns followed by some time spent filming for the Backyard Brawler contest. Terry wanted to do something a bit different than other contestants so he decided to follow some NRA rules and place the Brawler Silhouette’s at 20,30,35,45 yards, he would be shooting “offhand” as well.

Terry had a great idea of making small stands for the silhouette’s to sit on. He tied them to the small stands so they wouldn’t fly off and disappear in the brush.

The weather was beautiful and clear with a cool wind that would pick up occasionally throughout the day. The location was near perfect for setting up the tiny silhouette’s at various ranges counted off with a rolling tape measure.

Terry spent about 15 minutes practicing before he finally wanted to start filming, those tiny silhouette’s were not easy to shoot offhand. His Field Target modified .177 Benjamin Marauder was set up very nicely for this type of shooting. ( watch video for his description of the rifle)

As I filmed Marley kept her eye’s on the action, Terry made those shots look easy considering the wind was not cooperating. We had a great time filming this entry and can appreciate the practice that goes into making these shots offhand. Enclosed is a short video of the entry from Offhand Airgunner, help him out by hitting the heart symbol on the video in this link.

Below is the video from his YouTube Channel

 

Love Airguns and want more? Visit Airgunflix forum