, ,

Air Venturi Nomad II Compressor Review

Several weeks ago I received several new products to field use, one was the new Air Venturi Nomad II compressor. I was excited to unbox the compressor and get it into the field and see how well it worked. I had spent several days prior reading about it, as well as taking down some ideas for my video review of it. The compressor was shipped in a very sturdy box and packed extremely well with plenty of padding on all sides. I knew this would be a fun review because this compressor is something I have wanted for a long time. Over the years I have traveled to many places to hunt, some are extremely remote and required me to bring several tanks. The Nomad II has pretty much been designed to keep guys like me in the field for extended periods of time. Here I will enclose as much information as I can on the Nomad II through my own experience with it.


Air Venturi Nomad II 4500 PSI Portable PCP Compressor

The Nomad II 4500 PSI Compressor can work from home or in the field being able to hook up to your vehicles 12V battery. This is a great way to keep the Airgunner in the field being completely independent with air. The Nomad II plugs into a standard 110V outlet as well as being able to adapt to 220V. Once connected, you can fill PCP guns directly up to 4500 psi with an adjustable cut-off switch.  The compressor includes a hose with female quick disconnect fitting, integrated moisture catch and bleed valve as well as maintenance parts.

  • Adjustable auto-shutoff
  • Pressures up to 4500 psi
  • Integrated LED lights on underside of the unit for low light use
  • Capable of running off of a 110V or 220V outlet or 12V car battery
  • Power supply for electrical outlet use is built into the unit
  • Compressor includes carrying handle
  • Fan-Cooled
  • External Lubrication Port (Use Silicone Lubricant only)
  • Jumper Cables included
  • Hose w/ integrated moisture catch and female QD fittings
  • Noise level while running is 92 dB.
  • Dimensions: 10.6″ L x 8″ W x 7.9″
  • Weight: 19.6 lbs
  • Ships with travel bag for easy transportation

Please Note: The Nomad II is recommended for filling PCP guns only and is not to be used for breathing air.

The Nomad II comes with a very well made travel bag that holds everything you will need for filling in the field. Here are the contents included:


I read the instructions and to be honest was a little nervous, not because it was difficult, but because it was something new. I figured I would be just about the first one to review this product, so I wanted everything to go perfectly. Over the past year I had read many stories about these small compressors failing, and just not lasting very long before burning out. My first run of the compressor was in my garage, just trying to get familiar with how it worked and that it functioned well enough for field use. My first fill was on my Gen1 .22 Marauder that had been sitting for some time with very little pressure in it, something like 400 psi. The Nomad II is set to run on standard 110V household outlet, but can be configured to run on 220V with a simple procedure explained in the instructions. I plugged in the compressor and the cooling fan immediately comes on. I plugged in the fill whip to the compressor, set the PSI to shut off at 3000 psi. (NOTE) When using the compressor it’s very important to keep the cooling fan open, don’t have anything obstructing it. Place the compressor in an area it will get the most open air.

After setting the compressor to 3000 psi I plugged the fill whip into the Marauder.

Once the fill whip was securely connected I hit the power button on the top of the compressor.

The display on the load indicator will go up, and through my experience to about 20 when filling smaller cylinders such as the Marauder. I kept my eye on the gauge and was surprised how fast it filled to 3000 psi. It took a little over 3 minutes to fill up the Marauder, and the compressor shut off exactly where I had set it to.

After the compressor shut down I turned the pressure release counter clockwise, this knob is located just under where the fill whip attaches to the compressor.

Before I pulled the power cord on the compressor I wanted to check out the light that’s located underneath. This light is a brilliant blue and illuminated my garage quite well, kind of a cool feature that may come in handy for night hunts.

This compressor has very good build quality from what I can see on the outside. The carry handle, feet, light, load indicator and cover look very good. I wanted to go beyond what any other reviewer would do, so I removed the cover to check out what’s under the hood. My main concern was how it was wired as well as the visual quality of the components such as the built in power converter.

Everything was very cleanly wired with good connecters and quality heavy gauge wire. The 25 amp atc fuse located on the exterior of the unit is a good plus to the safety of the components. I like how all the components have a good amount of room to breath as well as being fed by the cooling fan.


The following morning Marley, Terry and I loaded the Jeep and headed into the mountains where we would film this review, and to do a little hunting and shooting. The Nomad II compressor packed very well into the Jeep and took no space at all, leaving plenty of room for all the rest of our gear. The morning was a bit cool with almost no wind, perfect day for filming a review.

We pulled into one of our usual shooting areas that’s next to a large riverbed, Terry wanted to do some target shooting and this spot is excellent. While Terry was setting up his shooting bench I pulled out the Nomad II and prepared it for review. This was the first time I had really tried to film anything like this, so I took my time setting up the camera.

The first thing I did was to hook up the battery cables and connect the red cable to the positive terminal followed by the black to the negative terminal.

I then plugged the yellow plug end into the right side of the compressor, the cooling fan kicks on right away.

(NOTE) Its very important to run the vehicle while the compressor is in use so that it wont drain the battery. The last thing you want in remote areas like this is to get stranded with a dead battery so I kept the Jeep running the entire time the compressor was running. The next step is to set the compressor to the desired fill pressure, I was using the Seneca Double Shot Shotgun that was down to 1000 psi. This rifle has a 244cc Air reservoir and was the perfect test for this type of compressor!

I hooked up the gun and started the Nomad II by hitting the on button, the load indicator will now start going upward.

The load indicator is a very important part of the compressor that shows us how it’s running. The compressor is designed to shut off if the load indicator reaches beyond 29, these numbers are telling us how hard the compressor is working. The Nomad II is not designed to fill large tanks or buddy bottles, it simply does not produce enough volume and would have to run much to long. The Nomad II is made to fill or top off Airguns directly where we are running it for short periods of time. The load indicator can tell us when the compressor needs lubrication or other maintenance. The compressor never went over 20 during any of the times I filled guns with it, chances are as it wears in those numbers may go a little higher.

The compressor shut off exactly where I had set it to, I released the pressure and disconnected the Air Rifle from the fill whip. I now disconnected the power cable from the compressor and then disconnected from the vehicles battery terminals. (Note) The carry bag comes in very handy to keep everything together and clean for storage when in camp. Now we can hit the field for a few hours of hunting, was a nice feeling to know I had all the Air I would need just back at camp. Marley and I hiked around for a bit looking for some birds and rabbits.

The hunting was a bit slow so I did some shooting as well as some filming for the video portion of my review.

After a full day in the field and getting to use the compressor in situations it was intended for I was pretty impressed. I think Air Venturi will sell a ton of these compressors, so far it seems to be the best portable option I have seen. Marley and I spent some time shooting with Terry before packing up and heading back down the mountain towards home.


I had a great time with the Nomad II compressor and found it to function perfectly and just as intended. When I got home I took it into the shop to read over the maintenance procedures that I filmed and photographed for this review.

Maintenance 

The Nomad II is fairly maintenance free but does need to be lubricated every 5 fills, this is very easy to do and is imperative to the health of the machine. To lubricate the compressor we will need to use silicone oil. On the left side of the compressor is a lubrication hole just above the cooling fan.

(NOTE) ONLY USE SILICONE LUBRICANT

The Nomad II comes with an applicator bottle but I found using silicone spray was much easier and less messy. A good rule of thumb is every 5 fills or if the LOAD indicator on the compressor is reaching 28 or higher. When we lubricate the compressor it should be running to properly make way inside the moving components. Two or three drops with applicator or when using spray just one small squirt, wipe off excess. Now is a good time to wipe down the exterior of the compressor and check to make sure no obstructions are in the fans cover. The Nomad II also has a filter that’s located inside the fill whip, this needs to be checked for debris every 2-3 hours of use, I would check it every 10 fills or if we have been using it in dusty areas. To get to the filter simply unscrew the cylindrical collar of the filter housing.

 Inside the housing the filter sits fairly snug, check to make sure it’s clean and free from debris or dark in color. The Nomad II comes with 4 of them that should last for quite a long time! Every 20 fills it’s necessary to purge the lubrication system. The reason we want to do this is to expel excess silicone oil and moisture. This is a very important step and imperative to the performance of the compressor. To purge the compressor is best done while it running, underneath is the moisture release valve, loosen it counter clockwise. Now we want to lubricate the lubrication hole on the side of the compressor. What this does is flushes out all the moisture and junk that may have built up inside the unit. With proper maintenance this compressor should perform well. These small compressors are sometimes used improperly such as trying to fill an SCBA tank, Buddy bottle etc, These are things that will burn it out and cause problems. USE IT AS INTENDED!!


I really enjoyed the time spent with the Air Venturi Nomad II portable compressor, I used it as intended and was very pleased with it’s quality and performance. Enclosed are my thoughts:

 

         PROS

  • Great build quality
  • Very nice carry bag that keeps everything neat and clean
  • Size, lightweight and compact to save space
  • Fill times
  • Load indicator (good for checking health of machine)
  • LED light for night use
  • 4500psi with set shut off
  • Easy maintenance (spare parts included)

CONS

  • I would have liked to see it with a cigarette lighter adaptor ( It would draw to many amps though)
  • Wish cables could be longer

If you are interested in purchasing this compressor it’s available HERE


I want to thank Air Venturi and Pyramyd Air for sponsoring us to make this review. Enclosed is the review in video form, hope this may help others interested in this great product.

Want more? Visit the forum over at AirgunFlix 

 

, , , ,

RX Target Systems Review

Over this past month we have had some great time spent with a new Airgun product manufactured by RX Target Systems. These are very unique targets that are brilliantly made right here in the USA by a friend of mine David  Bitkowski. Over the past year I have watched the progress of these target systems develop through post made in the many Facebook groups we’re both a part of. I enjoyed the enthusiasm David put into making these target systems. I soon wanted to reach out to learn a little more about him and this product he developed. Through our several emails and phone conversations he was kind enough to send us one here for us to review. To look back as to how David became involved in creating the RX Target Systems we will share this short story written by his daughter Melissa:


“My name is Melissa Bitkowski. I  am a third grader in Rossford, Ohio.  In March of 2017, I was diagnosed with a very rare chronic inflammatory disease called GPA, (Granulomatosis PolyAngitis). GPA occurs in 3 and 100,000 and mostly in older people. GPA  commonly affects the lungs, sinuses, and kidneys, and is caused by the immune system attacking the blood vessels . My sinuses and lungs were ok; but my kidneys became very sick and I had to use dialysis three days a week to clean my blood out, sort of like an oil change. We were told that the damage to the kidneys is called “Crescentic Glomerulonephritis” which happens to 7 in a million people with kidney damage. It  caused high blood pressures, seizures, and anemia that needed managed by medicine. There is no cure. Doctors treat GPA by making the immune system “go to sleep” or into remission using medicine so it stops attacking my kidneys . However, the first choice of treatment failed. We were told two thirds of my kidneys were unrecoverable. The second treatment put me in remission, but my kidneys still failed. I received a kidney from my Mom’s cousin which saved my life. Now I’m on anti rejection meds for the rest of my life and close monitoring by my doctors. This has been a very rough time for my family who has given up everything to help me live the new normal. My Mom has left her job of 15 years to take care of me, making sure I got to my dialysis appointments 3 days a week and doctor visits at CS Mott Children’s Hospital in Ann Arbor. My dad took money from his retirement and is working a lot of hours to help pay the bills. Dad started making Airgun Targets to keep his mind off the stress and to help others get better with shooting. He also wants to help support other families who have a child in Dialysis. Please consider supporting I our business . My  family and I thank you for taking time to read our story.”

After reading this letter it became apparent that it needed to be shared for spreading the word, and to hopefully play a small part to help out. David is a very dedicated family man and has spent countless long hours in his garage putting together these fine target systems.


About the RX Target Systems

FROM SKETCH TO FINAL INSPECTION, EVERY EFFORT IS MADE TO ENSURE A QUALITY PRODUCT IS PRODUCED. THOROUGH RESEARCH WAS DONE PRIOR FILING FOR A UNITED STATES PROVISIONAL PATENT, 60207-US. THE DESIGNS ARE ENTERED INTO AUTO-CAD THEN CUT OUT ON THE PLASMA TABLE.  THE FACE PLATES, TARGET PLATES, AND RESET BARS ARE THEN CLEANED OF THE ROUGH EDGES, AND WASHED TO PREPARE FOR PAINTING OR RETAIN NATURAL FINISH. WOOD IS CAREFULLY SELECTED AND CURRENTLY CONSISTS OF PREMIUM CUT PINE.  RUSTOLEUM BRAND SPRAY PAINT IS USED FOR ITS COST EFFECTIVENESS AND WIDESPREAD AVAILABILITY.  FIELD TESTING IS DONE WITH EACH MODEL TO ENSURE IT HANDLES THE FORCE TO WHICH IT IS RATED.

David does extensive testing of all his products to ensure they can withstand the repetitive force of Airgun use.

 KITS ARE SHIPPED ASSEMBLED WITH THE EXCEPTION OF THE FACE PLATE WHICH ATTACHES WITH TWO HEX BOLTS.  ONE KIT WEIGHS ON AVERAGE 8 POUNDS. EACH BASE IS 16″ LONG. FIELD TARGET WIDTH IS 8″ AND BULL CHALLENGE IS 6″. HEIGHT IS 4“. The RX Target Systems are available in many different styles and colors that can be used for many different shooting applications. Most of these targets are designed for smaller calibers but that may change soon as the need for something that can withstand large calibers is growing. These are very well made for the cost and was a bit surprised seeing just how well these have been built. Terry and I spend some time with them in the field and found the target to be extremely enjoyable to practice with.

Rx Bull Challenge, shown with black and white style. Standard with 1 inch bulls but can be customized to skill, down to 1/4 inch. Great for biathlon style shooting.

These targets can be custom painted directly from RX Target Systems or customized by the user. We found this camo model to be an excellent challenge as well as looking really cool during field use.


Terry, Marley and I headed into the remote mountains of Southern California to film for several videos as well as to give us a great opportunity to test out the RX Target Systems.

 Terry is a very well accomplished field target shooter and can be found on the Offhand Airgunner YouTube channel. I figured Terry would be a great candidate to try out this target as I felt it was the perfect tool for practicing for field target. We spent a good portion of the day filming as well as taking several photographs of various products. We set up near a riverbed that offered some good cover from the wind as well as a safe area for some long range shooting with a Big Bore we were testing.

Terry and I set up the RX Target System at 25 yards, we nestled it between two bushes that left a great backdrop to the target.

At 25 yards this target was a good challenge for me, especially offhand.

The RX Target System was easy to set up, we spiked it into the ground with stakes through the provided holes on the base.

The reset hinge has a nicely riveted hole that’s makes a secure place to tie the reset string. David has obviously done his homework on this design because everything works so smoothly. The major working components of this target system are protected well and stronger than they need to be to last during heavy use. Lets face it, they have to be to withstand thousands of pellets hitting them at 25+fpe. Terry had brought his .22 Tapian Mutant with the newly mounted Discovery optics scope. This is a great kit for both target shooting and hunting and is no doubt one of the most accurate bullpups on the market.

Terry made using this target look easy, doing it all offhand. I had a difficult time and found the kneeling shots to be much easier for me, you can see from the photograph I missed a few times. This is the type of target I can easily set up in my backyard to practice some improvement on my offhand skills. I can see the RX Target Systems being an excellent gift to ANY Airgunner and something that will last for years. I hope our readers will reach out to David and share his story with others, he’s a great guy and has a strong foot in the Airgun community.


We had a great time with this target and was able to gather some good video of our use of it that will be enclosed at the bottom. I would urge anyone interested in purchasing the RX Target Systems to visit Davids website or Baker Airguns who is now a distributor of these awesome targets. You can also find RX Target Systems on Facebook here.


If you would like to make a donation to help families affected by Childhood Kidney Disease in your area, contact David for help finding these locations. Here is his email:

dave@rxtargetsystems.com


WANT MORE? Visit the video forum at Airgun Fix

, , , ,

Seneca Double-Shot Shotgun field review

A few weeks ago I received two Air Venturi products, the Seneca Wing Shot and the new Double-Shot Air shotgun. These are both products of Air Venturi and arrived fairly quickly with 150 loaded shotshells and .50 Air Bolts. I had very little experience using any type of shotguns, so I was a bit excited as well as skeptical using them in the field. My expectations of air-shotguns were very low. I expected them to have low power, be heavy and have only a few inefficient shots before getting refilled. This detailed article is written as my first-hand experience using these in the field.


      Seneca Double Shot .50 cal Double Barrel Shotgun

  • Precharged pneumatic
  • 244 cc air cylinder
  • Two Smooth Bore Barrels
  • Up to 5 good shots per fill
  • 3000 psi fill
  • Male Quick Disconnect Foster Fill Fitting
  • On-board pressure gauge
  • Velocity up to 1130 fps with shotshells
  • Velocity up to 425 fps with Air Bolts (170+ FPE)
  • Velocity up to 600 fps with Round Balls (140+ FPE)
  • Thread on chokes (Easily removed for use with Air Bolt or Slugs)
  • Front bead sight (no rear sight)
  • Optional 11mm dovetail scope rail to add optics
  • Ambidextrous hardwood stock
  • Rubber Buttpad
  • Patent Pending Air Distributor allows a follow-up shot in less than 2 seconds
  • Bore Diameter: 12.47mm Barrel Thread: 16.6×18 Choke Measurement: 12.4mm The choke reduces the inner barrel diameter from .494″ to .486″

Easily the most flexible big bore system on the market: Double Shot delivers a decisive one-two punch to medium and large game with any combination of .50 caliber ammo, shotshells, and the Air Venturi Air Bolt. The Double Shot uses a patent-pending air distributor that allows you to perform a quick follow up shot in less than two seconds, through the use of a barrel selector dial. Simply load both barrels, rack back the bolt, fire your shot, twist the barrel selector dial, rack the bolt, and fire again. To sight in on your target, use the traditional shotgun style bead sight, or purchase the Air Venturi 11mm Dovetail rail for mounting the optic of your choice. This innovative PCP uses a 244cc cylinder, filled to 3000 psi, that provides 5 full-powered shots per fill. This high pressure translates to incredible velocities with up to 1,130 fps with shotshells. The options don’t stop there, as the Double Shot can sling .50 caliber big bore ammo and the revolutionary Air Venturi Air Bolt—an arrow-slinging system that can put 170 FPE on target. Each Double Shot features the trademarked etched actions and finely grained hardwood stocks you’ve come to expect from a brand that pays homage to the golden age of the hunt. Put simply, the Seneca Double Shot is a very versatile big bore PCP shotgun that doubles down on big bore power. This is a PCP shotgun that can sling .50 caliber rounds downrange one shot after the next, perfect for small game such as birds and rabbits. Load slugs, round balls or Air Bolts for large game hunts.

Check out these configurations below:

Mount up optics with the Air Venturi 11mm Scope Rail (sold separately).

SHOTGUN: Choose the shotgun option and enjoy velocities of 1,130 feet per second with either No. 6 or No. 8 filled shot shells. With consistent spreads of 12″ at 20 yards. (NOTE) Empty shells can be purchased to customize your load for various types of hunting)

RIFLE: UNSCREW THE CHOKES BEFORE USING LEAD BULLETS. Hunting for larger game? With .50 caliber slugs the Double Shot offers speeds of 600 fps and fpe exceeding 140. That’s more than enough power to take medium game with a well-placed shot.

BOLT-SLINGER:  UNSCREW THE CHOKES BEFORE USING AIR BOLTS. Arm your Double Shot with Air Venturi Air Bolts to turn your air shotgun into a hard-hitting arrow launcher!  Now more speargun than airgun, be careful not to “Robin Hood” or split bolts already on the target –they are that accurate!  Capable of speeds up to 425 FPS and 170 FPE, Air Bolts are a fusion of innovative design and incredible knockdown power.


The first day out with this rifle was mostly to just get familiar with its function as well as to get several promotional type photographs to use for this report. I took both rifles with me to make sure they both functioned and would be sufficient to hunt with. The only part of the rifle that needed assembly was the cocking bolt, very easy to install with the provided allen key. Marley and I arrived to our location high in the mountains in a remote part of California, perfect for testing these rifles. My first impression of the Double Shot was great, it’s lightweight at 7.5 lbs and has a great looking wood stock as well as good durable metal finish. I found the rifle to be very easy to fill with a standard foster fitting with a cap that snaps on and off with ease. The rifle is very well made and has a unique and robust double loading breech with a manual valve that controls airflow into each barrel.

I loaded the rifle with the provided Air Venturi #6 shot that came boxed very well, these in my opinion are great for birds, but from later experience found them to be too light of a load for rabbits.

Marley and I proceeded to hike North away from the Jeep hoping to spot some Quail, Cottontail and Jackrabbits. The rifle really carried well and had a great solid feel to it and it did not feel like 7.5 lbs at all. Within several minutes of hiking I had spotted two Jackrabbits running up the hillsides at over 100 yards away. Marley and I moved slowly into the mountains with the hopes to get some closer shots on rabbits as well as to find some Quail. We were now several miles from the Jeep and decided to take a much needed break from to 80+ degree weather. I figured we would sit in the shade for awhile and wait to see if I could spot any movement on the nearby hillsides.

After about 20 minutes of rest Marley and I continued in a large loop through the brush covered hillsides with very little activity. Marley flushed out a good sized Jackrabbit that sped off leaving a poof of dust behind, much too quick for me to even react. I had made the mistake of not mounting my camera on the rifle and was only carrying my movie camera and tripod. On the way back we flushed a large covey of Quail and I was able to get several shots on a few at 40 yards. The brush is so thick that the #6 shot just didn’t carry enough energy to get through it at that range. Our real goal was to test the rifle, see how it carries and look for performance issues. As we made our way back down the hill I made several stops to take some more photographs, as well as to enjoy the beautiful scenery this location offers.


The following day I was accompanied by my good friend Terry who is an avid Airgunner and hunter as myself. This would be his first experience hunting with an air powered shotgun as well as his first time hunting the California Quail. These birds are abundant in the areas we hunt, but are incredibly difficult to find and get close to.  Terry and I left fairly late in the morning and arrived to our location around 11:00 am, the weather was in the low 80’s with a slight cool coastal breeze. Terry would be using the Seneca Wing Shot, the single barrel version of the Double Shot. He was impressed with the simplicity, lightweight and feel of the rifle right away. We did some initial shooting with it just so he could get a feel for it as well as familiarizing how to aim it. We found that the front bead covering the target would get the full pattern on the target. The pattern was as stated approximately 12″ at out to 30 yards, great for birds and even rabbits at close ranges.

 

Terry, Marley and I headed out into this large field where we had spotted a large covey of Quail. We moved through the field with Marley zig zagging through the tall grass trying to flush some birds and rabbits.

We continued through the field in a big loop that took us into some thicker areas where we soon spotted a large covey of Quail at 50 yards. Terry and I both took shots on several that were fleeing away from us. I believe we may have hit one of them but the area was so thick that Marley had a difficult time making her way through the brush. This was the most fun I think I’ve had with an Airgun in a long time, a very unique way of hunting. The challenge at this point was very apparent to both Terry and I, super fun nonetheless.

‘Terry and I took a short break in the shade and just enjoyed being out in such a beautiful location to hunt. Terry was saying how surprised he was on how light the Wingshot was to tote around, shouldered nice and had a forearm that made good for offhand shooting.

Over the course of the next few hours we had very little luck finding any birds or rabbits, but we did have some fun back at camp. We had set up some small pumpkins at 20 yards and took turns blowing them off the log.

After looking at the damage afterwards it became apparent how powerful these shotguns were. The shot penetrated through very easily, with heavier load I’m sure they would have exploded. The rest of the day was spent doing some filming and taking some more photographs for this write up. The following week would be the Dove opener so I had planned to come back to try for that, giving me a better chance to capture something on film. When making field use videos we sometimes feel like we have to capture a kill on film. I have to remember that when hunting there is never a guarantee. We still enjoy the time out getting to hunt with some awesome Airguns.


Today Marley and I got up very early and headed back for the Dove opener, this would be another first for me. I had not really ever hunted many birds, through curiosity had been reading as much as I could on the subject as well as watching a few videos. I had decided the night before to pull apart several of the #6 shot shells and replace them with 20 Crosman Copperhead BB’s. I felt that the #6 was just to lightweight for punching through the brush as well as making longer range shots. When we arrived I tested out several that I had loaded on a tin can at 35 yards, the shot seemed to hit with much more authority. I had packed my large backpack with close to a gallon of water, snacks, as well as all my camera gear. This time I had decided to mount a small Sony HD camera to the barrel of the Double Shot, hopefully to capture the action with ease.

We headed up through a rugged canyon that had many fallen trees and tall dry grass that eventually lead us into some very thick brush. I wanted to get up into the higher elevations to get to where the Cottontail would most likely be, as well as some birds. Within about 20 minutes I spotted several Doves fly overhead and land in some nearby brush. Marley and I quietly made our way closer where I was able to take one at 35 yards as it was perched on a branch.

The shot took the Dove down fairly violently and Marley was quick to make her first bird retrieval.

Finally after a few days with little luck I felt some success, it’s tough hunting but when things like this happen it makes it all worthwhile. What a beautiful bird, I was hoping several more were around but I think we would have to work hard to find them.

Marley and I bagged our prize and headed further South where it took us through a creek and up a steep ravine into the higher points of the mountains. By this time it was close to 9:30 am but fairly cool in the high 60’s, perfect weather for hiking. As we followed a small but busy animal trail I spotted out of the corner of my eye a small Cottontail scurry under a bush at 20 yards, THWACK!!!

Marley ran to find it with me close behind, it got hit so hard that it literally drilled it into the ground. I think 20 yards was a bit to close haha! After the recovery I filmed a little as well as taking some more photographs along with a much needed water break.

After our break Marley and I continued down the small animal trail along a ridgeline that was fairly flat giving us a fairly good view in front of us. As we slowly walked I soon spotted another Cottontail sitting under a nearby bush at 30 yards in front of us. THWACK!!! Another one down with authority, I actually hit a bit in front of it, but still managed to take it down.

As we continued down the trail I spotted two jackrabbits with one leaving me a great shot, in the excitement I aimed a bit to low just missing it. Very exciting watching Marley chase the huge jack into a big circle where I was able to take a good running shot hitting just behind it. I think with some more practice behind the gun I could really get used to hitting moving Jackrabbits. This rifle is so much fun, I love it the more I use it, and have found it to be near the perfect tool for this type of hunting. Using a shotgun can get frustrating when we see a shot that is beyond 100 yards, still at close range it’s versatility is well above a standard pellet shooting rifle. Marley and I made our way back to the Jeep where I planned to film some footage with the Air Bolts.


Back at the Jeep we took a rest and had some lunch, my legs were killing me from all that hiking around. I felt relieved that I finally had something to show for all the work I put into making this field use review. I mean lets be honest, we want to be successful and show how capable the rifle can be in real life scenarios. The Air Venturi Air Bolts are .50 in size and made from a carbon fiber shaft with finely machined aluminum tips. Broadheads can be fitted but the composite points are more than adequate for any small game use up to Coyote size.

The first thing we do when using the Air Bolts, slugs, round balls is to remove the chokes from the barrel. To do this they simply unthread from the rifle, these chokes are what adjust the shot pattern. After we have removed the chokes we can now insert the Air Bolt from the muzzle end of the shotgun.

The Air Venturi Air Bolts have a small o’ring at the end of the nock, this o’ring rides on the inside of the smooth bore creating a seal to propel the arrow at optimal speed. The Air Bolt can achieve 238 foot pounds of energy, more than any conventional archery device I know of.

The Air Bolt is easily inserted in the muzzle end of the rifle with a twisting motion to get the flights to glide through the bore. I took several test shots and was astounded at both the accuracy and power of these things. I actually broke one of them because it went through my test target and into the tree behind it. The arrow had gone so deep into the tree I couldn’t remove it without breaking the shaft. These Air Bolts are not cheap, but could be extremely deadly on almost any game animal. I set up a target at 35 yards and was amazed at how accurate they could be. Even with having just open sights a scope on the rifle would be most ideal for this setup.

Over the past week I have enjoyed the Seneca Double Shot Air Rifle, it’s versatility and fun is near impossible to beat. I went into the situation a bit skeptical, but was quickly satisfied after my first shot with it. This truly is one of the funnest Airguns I’ve had the privilege to use in the field. I think with some practice one could become very efficient in hunting with this awesome piece of kit. My final thoughts are as follows:

PROS 

  • Extremely versatile
  • Great fit and finish
  • Lightweight
  • Simple design
  • Easy to fill
  • Great power

CONS

  • Need buddy bottle for longer trips
  • Cost of shot shells/ Air Bolts

I want to thank Air Venturi for sponsoring this field review and allowing me the opportunity to bring my honest review of this great product. If you like what you see and are interested in purchasing this rifle please click HERE to find the best location for you!


Here is the video documentation of our adventure with the Seneca Double Shot, help us out by SUBSCRIBING to our YouTube Channel.

Love Airguns and want more? Visit AIRGUNFLIX forum

, , , , ,

Pyramyd Air Backyard Brawler Challenge

Over the past month we have filmed several field reviews that are scheduled to be released here very soon. When we were in the field we had the honor of teaming up with Offhand Airgunner, a new channel dedicated to field target competitions, reviews, and hunting with Airguns. We filmed the entry that would be submitted to the contest put on by Pyramyd Air. Here is what’s involved to enter:

HOW TO ENTER

Order your FREE pack of Air Venturi Airgun Slynger Metal Silhouette Targets (you pay shipping & handling). Use the promo code: BRAWLER.

Once you receive your targets, take a video of you shooting down the targets with your favorite airgun, or air pistol.

Upload your video to YouTube, or Vimeo, and do the following:

  • Make sure your video description links to pyramydair.com/bb.
  • Include “Pyramyd Air Backyard Brawl” somewhere in the title of your video (Example: World’s Best Pyramyd Air Backyard Brawl Video Ever!)
  • Make note of the video URL, so you can enter it into the form below.

Spread the word, share this giveaway for more chances to win.

Contest ends November 10, 2018. Limit one entry per person. Winner will be announced the week of November 12, 2018.

All entrants will receive $5 in Bullseye Bucks at Pyramyd Air.


Terry and I set out for the mountains of Southern California to do some Quail and Cottontail hunting with the Air Venturi Wingshot & Double Shot Shotguns.

We spent the majority of the day hunting with the shotguns followed by some time spent filming for the Backyard Brawler contest. Terry wanted to do something a bit different than other contestants so he decided to follow some NRA rules and place the Brawler Silhouette’s at 20,30,35,45 yards, he would be shooting “offhand” as well.

Terry had a great idea of making small stands for the silhouette’s to sit on. He tied them to the small stands so they wouldn’t fly off and disappear in the brush.

The weather was beautiful and clear with a cool wind that would pick up occasionally throughout the day. The location was near perfect for setting up the tiny silhouette’s at various ranges counted off with a rolling tape measure.

Terry spent about 15 minutes practicing before he finally wanted to start filming, those tiny silhouette’s were not easy to shoot offhand. His Field Target modified .177 Benjamin Marauder was set up very nicely for this type of shooting. ( watch video for his description of the rifle)

As I filmed Marley kept her eye’s on the action, Terry made those shots look easy considering the wind was not cooperating. We had a great time filming this entry and can appreciate the practice that goes into making these shots offhand. Enclosed is a short video of the entry from Offhand Airgunner, help him out by hitting the heart symbol on the video in this link.

Below is the video from his YouTube Channel

 

Love Airguns and want more? Visit Airgunflix forum