Posts

, ,

USING A DOT SIGHT ON A BIG BORE AIRGUN

This past Morning I showed up to Johns at 3:00 am to pick him up to hunt but he was feeling under the weather so he gave me the AAA Big Bore .357 along with a 50 round box of his precision made 125 gr pellets. I set out to the high desert on a solo mission to try and get a Jackrabbit, it was 61 degrees and had just rained the day before.

Hunting area

The time of arrival was 4:45 am, I filled the gun to the 3600 psi and loaded the 6 massive pellets along with water and food for the day. The gun was equipped with a very small dot sight that was sighted at 90 yards along with a Magpul forend grip for comfort. I too was carrying my binoculars around my neck as I was going to be glassing the Jackrabbits.

dot sight

The morning was a bit slow as I’m guessing the Jackrabbits may have still been held up from the recent rainstorm. Within about 20 minutes I sprung a young juvenile out from behind a set of Joshua trees and he was gone, making his large 1 mile loop back to the same spot. The hiking was a bit rough and I was tired, by 9:00 am it was already in the mid 80’s and getting hotter by the minute. I had taken a break around that time under some shade hoping to spot some ears in the distance, no such luck even with binoculars.

sitting in shade

The day was just plain slow with action so I hiked some more, my GPS said I had ventured 6 miles by this time. The slayer is very lightweight and at this point was happy it didn’t have the extra weight of a scope. I was a bit skeptical on the use of a dot sight on a gun that’s capable of 300 yard shots. Everything becomes heavy when your hiking in the desert at these distances, my feet were sore and I was frustrated in not seeing anything but Juveniles all day. I started making my way back and soon came into a large valley with Joshua trees on one side, I thought to myself there has to be a Jackrabbit in here. I used my binoculars and sure enough there was, at 100+yards I could barley make out his ears so I stalked in staying very low to the ground. As I slowly made my way into a 60 yard range using the bushes as my cover, making sure he had no view of me.

jackrabbit area

The Jackrabbit was a medium sized one but still the only good opportunity I had seen all day so I went for it in the kneeling position. After a few moments I raised the gun, aligned the dot a bit below his head and squeezed the trigger,”THWACK” instant poof of fur and blood.

jackrabbit kill

To me it looked like I had shot a can of red spray paint is best I can describe. The Jackrabbit actually got flung backwards around 5 feet from the impact.

jackrabbit headshot

The Slayer is just plain devastating and I was shocked by the damage the 125 gr pellet did, the impact went into the neck and came close to decapitating the head completely. I can honestly say its been a long time since I’ve had to put that much work into making a kill but it was well worth it just to see what that guns capable of. The use of a dot sight on a Big Bore such as the Slayer actually surprised me on how well it functioned. Aquisitioning the rifle to target was much faster than with a scope and too was much easier to see in low light conditions along with loosing the weight of the overall rifle. The dot sight is a great system for someone looking to hunt at closer ranges out to 100 yards such as predator hunting and even deer. The obvious downside of a dot sight is lack of magnification and reliance on batteries to function. Anyone looking for a Bull-pup with loads of power in a lightweight, easy handling with reliability and good looks,this is it.