Posts

, , , , , ,

Cometa Lynx V10 .22 Field Review

Several months back I found myself researching some possibly overlooked Air rifles and came across a few reviews of the Cometa Lynx V10 rifle. Most of the reviews I saw were all in Spanish and really didn’t give me a good overall opinion of the rifle. After some further research I decided to reach out to Cometa that is facilitated in Spain. Within about a day I received a very nice email back passing on my information to the US distributor Airforce International. In particular, the main parts of the airguns such as the barrel, stock and tube are manufactured and controlled by Cometa itself. All the airguns are individually tested and calibrated by them; the speed is controlled under the laws of each country. Within a few more days I started corresponding with Airforce International and they were most helpful in providing me with a .22 Lynx V10 PCP rifle that got shipped out to me very quickly. The rifle was packaged very well and included a single shot side load magazine, 13 shot rotary magazine, several extra o’rings as well as two allen keys to make adjustments to both the power output and trigger.

  • Maximum pressure 200 bar/3000 psi.
  • Constant regulated pressure. Included pressure gauge.
  • Easy loading of pellets with multi-shot magazine.
  • High precision cold hammered barrels with 1/2” UNF thread.
  • Adjustable two stage trigger and manual safety.
  • Ambidextrous stock with a modern checkering.
  • Power is easily adjusted by the user*. It allows the shooter to use the air rifle for hunting, Field target, long and short ranges, etc.
  • Great number of shots per charge, offering up to 1,000 shots in some configurations**.

* Maximun power limits set according to the Laws of the Country of destination.
** 400cc tank offers huge shot count.


After spending a few hours getting the gun sighted in with the Leapers ACCUSHOT UTG 30mm 1.5-6X44 I packed it up into the Jeep where it would be traveling deep into the Mojave desert for a several day adventure hunt. Marley and I left late friday afternoon to arrive to our camp to meet my good friend Mike by 8:45pm, the weather was getting extremely cold and I had just hoped we would have a few good days with no wind. Upon arrival to our camp we started a large fire that kept us warm while we cooked dinner.

That night the temperature plummeted into the low 20s and made me thankful I had chosen to stay in the Jeep rather than a tent. The following morning was equally cold until the sun finally made its way over the mountains to raise the temperature into the mid 70s by 9:00am. Mike, Marley and I had set off a little prior to field use another product so this particular hunt didn’t start till around 11:00am. The Lynx V10 is right from the start a very well balanced rifle and shoulders very comfortably. Marley and I set off South from camp and walked down a trail that nestles between many boulders, fallen trees and huge rock outcroppings followed by miles of Oak tree pastures.

This area is supreme habitat for the California Ground Squirrel, these squirrels are said to hibernate this time of year although when it’s warm they occasionally come out for sunning. Within about 5 minutes of walking down this trail I spotted a large Ground Squirrel sitting on top of a large boulder.

I crouched down next to a tree and set myself up for the 72 yard shot.

I lined up my shot and did the best I could to adjust for the slight breeze from left to right, I squeezed the trigger and sent the 14gr H&N field Target Trophy right into the squirrels neck. The Ground Squirrel violently flew back and rolled off the backside of the rock.

Marley and I attempted to recover the Ground Squirrel but unfortunately it was lost down inside a rock crevice. We continued our walk down through the valley stopping frequently to look for movement in the many rocks and fallen trees. This area was a bit slower than it is in in Spring and Summer months but still had a small amount of activity left.

As we took a break and did a bit of film and photograph work I was just enjoying being out in such beautiful country.

After our short bit of film work we continued on a small animal trail that weaved through many trees and as we came around into a clearing I spotted another Ground Squirrel sitting up on top of a boulder at 68 yards. I was easily able to make a headshot that really gave a smack with instant lights out.

As Marley and I continued on the small animal trail I had spotted several more Ground Squirrels moving about through some fallen branches. We sat 50 yards away under the base of an Oak tree and waited for one to hopefully show itself.

Within about 10 minutes I finally spotted a tiny head poking up from behind a crack in the very top of the large outcropping.

I was able to make another headshot that sent the Ground Squirrel sliding down through the crevice. By this time it was getting late in the day and I still had quite a bit of film work to get to so we headed back towards camp.


The .22 Lynx V10 is pretty much an all day gun getting about 70 shots per fill as well as being reasonably quiet. The hammer forged barrel has really shined in this gun and I felt pretty confident with it out to 75 yards. The safety on the gun was my only little issue I had as it felt like it could be a bit smoother, I think with some use it may smooth out. The black wood stock may scratch easy as well as being susceptible to pressure dents. The natural wood finish may last longer cosmetically but really may not be an issue if the gun is cared for. The Lynx is fairly easily adjustable such as the power level and two stage trigger although I was very pleased with everything right out of the box. During field use we can sometimes find things about a gun we would never find from the bench, this is one reason I enjoy this type of review. The majority of buyers may not just be paper punching but using this gun for hunting, one reason I wanted to document its field test. My overall impression of this gun is pretty high considering price, features and accuracy that can compete with guns twice the cost. I will include this video documentation of my review along with the hunt. The goal of this review was to share my experience and hopefully to be the deciding factor in purchasing a Lynx V10. Here is the link to Cometa’s US distributor Airforce International who I would like to thank for the use of this fine rifle.

, ,

Kral Puncher Breaker

by Dana Webb

After visiting the 2017 Shot Show in Las Vegas the United States was introduced to the Kral line of rifles and bullpups. The initial reviews were all very exciting, Krals looked to be a great entry level Airgun that offered many features of even the higher end Airguns. The Krals seemed to flood the market almost overnight, several distributors even had them on pre-order. Soon after the first batch of Krals arrived the great reviews started that in turn made them even more desirable to the consumer, the problem with this was nobody really knew much about the guns other than on the surface and short term use. After several weeks some problems with the guns started popping up around various forums. Several well known tuners had made attempts to modify and remedy the problems, parts, design and materials were obviously not well thought out by Kral, leaving many customers to fend for themselves as far as service and repair. This is just a vague story of the initial problems with the guns and needs not go further. Several months ago a gentleman by the name of Roger contracted the Airgun bug and decided to make his first PCP purchase that happen to be a Kral Puncher Breaker bullpup. Over the next three weeks Roger had spent almost every weekend shooting with an elite group of Southern California Airgunners, one of whom was Ron Stephen.

Kral Puncher Breaker

One weekend Roger showed up to shoot, filled his gun, loaded his magazine with pellets and “TINK”, nothing happens and the gun wont fire. Ron, being a good friend ends up taking the rifle home that day in hopes of fixing it through some help and research through the Gateway To Airguns forum . After a bit of reading Ron soon realized just how many problems he was finding and the unfortunate lack of support from not only Kral but the distributors as well. Ron finally called me and had asked what I knew of the Kral line of rifles and if I knew of anyone that had a good amount of experience diagnosing, fixing and tuning them, thankfully I was able to turn him on to a friend of mine Troy Hammer. Troy is fairly new to the forums but has been working with Airguns for a good many years and had a good amount of experience with tuning them. Troy had recently started his full time career as a professional tuner and is the proud owner of Annihilator Airguns. Over the past year Troy has spent a good amount of time with tuning the Kral line of rifles and really is the only one in the United States that will service them as well as offering several custom parts and upgrades. Don’t hesitate to visit his website and reach out for help, he’s more than happy to talk Airguns.


by Ron Stephen

After having a VERY pleasant and educational conversation with Troy on proper disassembly procedure of this rifle, we got together yesterday to tear down the rifle. I wanted to verify, if in fact, it had the same issue with the broken valve stem…
….  and Oh BOYYYYY did we verify it !

My buddies rifle not only had a broken stem, (Yes,… right at the O-ring groove), but it was also BEATEN TO DEATH ! The broken end of the stem was SO Deformed and “Mushroomed”, it was wedged in the valve like a Rivet! Notice in the pic Troy previously shared (of the factory stem), that the stem is chamfered on the very tip. The stem in my buddies rifle was beaten so badly, that the chamfer is completely gone, and is now severely mushroomed.



The broken tip was stuck so tight in the valve body, I could not pull it out. I had to use a drift punch and hammer inside the valve body to drive it out. It was wedged in there MUCH tighter than I would have ever expected. Upon finding it in this bad of condition, I immediately sent these pics to Troy, to ask if this was what he has seen previously on other broken stems,… or if this was the worst he had seen ?  Not to my surprise, he confirmed that this was the worst he had seen so far. In fact, not only was the Stem beaten so badly, but even the Rear Face Surface of the valve body showed significant hammer impact  damage…

Troy and I both feel that there MUST be more to this than simply a “Weak spot” in the stem, due to the O-ring groove. After inspecting the broken pieces, We both feel that there must be a “Bad Batch” of stems, that were Not Properly Heat Treated,… and inevitably made it into the assembly of these rifles from the factory. I tested this theory using a VERY FINE Jewelers Hand File, and I feel our suspicions are spot on. With just a couple of very light strokes of the file on the broken stem’s tip, it was quite evident this was Very VERY SOFT Steel. It basically felt like I was filing on soft butter ! No way could this material EVER stand up to several thousand strikes of a hammer. It is NOT a matter of “IF it will fail”,… it is truly a matter of WHEN it is GOING to Fail !

I want to take this moment to thank Mr. Troy Hammer of Annihilator Airguns and Tuning for his assistance and patience in taking time out of his day, with my several calls for help. I am looking very forward to receiving his improved and upgraded Valve Stems, as well as field testing some of his other products for the Kral rifles.

kral valve stem

(Top) New Annihilator valve stem

It is guys like Troy, who help advance the development and improvement of our sport. He is not just someone who is looking out for himself… He is a active hunter, shooter himself, and he truly wants to help those of us who can benefit from his personal experience with these guns. He is an asset to the sport, and I am glad to have met him. Hopefully we will have an opportunity one day, to share some trigger time and maybe even a hunt or two !  ;D

THANKS Troy !

 

, , ,

Afternoon with an old friend

by Ron Stephen

So I decided to pull out an old friend and spend a little time together. Sporting some very nice borrowed glass and a new bi-pod, we did a bit of bench work to get zeroed and reacquainted. It wasn’t very long before we were both getting pretty comfortable at 100 yards, and any rock smaller than a golf-ball was easy game.


I grabbed up my Bog-pod and cool little backpack/stool combo and we went for a little walk around the chicken farm. We strolled through some brush and was keeping an eye out for any Dirt Rats that may be in the area. The new spring pups have been starting to come out in droves on a few of our other permissions, so I figured I should do a little scouting for them on this permission. I did see several off in the distance, but they were moving too fast and would drop into there hole at the slightest sense of danger. I guess they had been watching me and my friend while we were zeroing in on the small rocks, hahaha. We headed towards the spot where the farmer piles up the dead chickens, to see what kind of activity might be going on over there, and to just do a little “Recon” for any possible Coyote action, (for a later hunt).


Yep,… there was definitely some evidence of recent Coyote activity.
They will go pull dead chickens off of the pile, and carry them into the brush for some cover to eat their meal.
This is obviously a favorite spot for them to feed on.


I decide to sit for a little while as the sun was getting low and hang out to see what might wander in.
No,… I wasn’t planning on using a .22 Marauder for Coyote, (as it really doesn’t have the power that I would prefer to use on them), but was just more interested in sitting for a bit to see what might come around for a photo op.
While sitting there, I noticed something strange on the trail a few feet from me.
I thought it kind of odd to find this laying in the middle of the trail, (and not really anywhere near any of our previous Coyote kills),
and it made me wonder if Coyotes would feed on their own dead? I dunno, but maybe they might ?


While sitting there and thinking about it, I noticed some movement a ways down the trail from me. I grab my rangefinder and I see two Cottontails doing a little sparring with each other. So I slowly get up from my seat, figuring they are not paying attention to me, and are more interested in “winning the battle” between themselves, to run each other off. From a standing position, I set my old friend into the Bog-pod yoke and steady myself. I adjust the side focus, and the Hawke Sidewinder is crystal clear, The magazine is filled with JSB 18’s, and I quickly chamber a round. The Rabbits a still challenging each other, constantly moving in and out of the edge of the brush line, jumping and running around each other. I’ve got to wait for the shot, and my friend is telling me to have patience and confidence in it’s ability to accurately deliver. After maybe 30 seconds, one of the rabbits gives up the fight and heads out into the bushes. He’s lost the battle, and is gone. The “Victor of the battle” claims his territory, and settles for a moment to munch on some grass. He’s calm and not moving now, but I can’t see most of him due to a bush and a rock. I still have to wait. Finger goes into trigger guard and makes ready. The rabbit makes a single small hop into a perfect profile view, giving me the view I’ve been waiting for. I squeeze of 2nd stage, and the JSB flies straight and true. I heard that satisfying “catchers mitt ” sound, and the rabbit rolls to his side with little more than a twitch.

He may have “won the battle”,… but he certainly “lost the war” !

Entry … (not too bad of placement I’d say  ???  ;) )

Exit …  (I’m pretty darn sure the fuse-box experienced a “direct short” with this  shot :o  :P  8) )

Satisfied with my friends loyal performance, the sun getting low and darkness coming soon, I decide to head on back to the truck.
I’ve still got to clean up camp, and drive about 50 miles home. As we approach the truck and are no more than 10 feet from it, I see some movement at about 30-35 yards to my right.  I quickly turn to see a very large Skunk just as he is heading into the bushes. All for the better, as I don’t really feel like dealing with that stinky mess , (and probably having to smell it all the way home),… so he gets a pass.
As I’m taking off my backpack and at that same moment I see another movement on another little trail at about 60-65 yards.  I raise the rangefinder to see another rabbit and “Mr. Simmons” says it’s at 67 yards. Good enough for me. The Bog-pod is quickly deployed, and my friend goes back into action, This will be my last possible shot for the day, as I can BARELY see through the scope in the near darkness.  My friend does not disappoint. The JSB leaves at around 850 fps and finds it mark to make Quite the mess !
Wow !, do you think it hit something major ? ? ?


OK, so time for a quickie Group Photo,
set up a cleaning table,
and get to work….


Cottontails dress out so clean and easily,
and they are both done in about 15-20 minutes.


As I’m closing up camp, and can barely see in the dark, I look down to see this coming up the toe of my boot, and heading towards my pant leg. Whoa !, don’t think I want to be getting THAT friendly with this Creepy Crawler ! A couple of good STOMPS and the size 10 takes care of it. Whew ! I’m REALLY GLAD I saw that dude before feeling him up my pant leg. now THAT would have freaked me out !



Ok,
Bunnies on ice, and everything loaded into the truck. Time to go home and get the Crock Pot warmed up.
Rabbit Stew tomorrow is sounding pretty darn good right about now. So it took me a couple of days to get the Rabbits cooked up into a stew, but I did get them into the crock pot yesterday.


2 rabbits on bottom covered with 2 chopped potato’s, 1 onion, and of course a few strips of Bacon.
sprinkle in one scoop of H&H Dry Salsa mix, (I Love that stuff ). Makes the BEST salsa I’ve ever had, so why not spice up the stew a bit with it ?  ;DTop that with one more rabbit from a previous hunt, and I had in the freezer. 

,

Top that with a can of green beans and a can of sliced carrots,

let it sit on low for about 9 hours, and let it cool in the pot.
This morning I pulled all the veggies and rabbits, de-boned the meat, separated the broth, add a couple of beef bullion cubes to the broth and I am about to reduce the broth to a nice gravy now.
I hope it turns out yummy !

Thank you my “Old Friend”,…. I had a good time.
We’ll do it again soon.
Cheers !

, , ,

2017 SHOT SHOW

We headed out 6 hours to the Sands Expo in Las Vegas Nevada where we would make our visit to the 2017 Shot Show. We were very excited to make the rounds through this very large convention center that had 3 floors of Airgun and Firearm vendors. After a short walk we made our way into the Sands Expo where we checked in and proceeded to try navigating through the mass of foot traffic. The amount of people attending this event was astounding, no doubt making it the most popular gun expo in the world.

2017 Shot Show

Our first stop was at the Airguns Of Arizona booth where we ran into Tony Roman from the popular site Airguns Air Rifles & Pistols as he was checking out  few very cool products they carry.

Tony Roman

Some of the new Daystate models were no doubt in our opinion some of the nicest Airguns of the show as they even attracted some popular faces such as Giles Barry from the Airgun Gear Show. The Daystate rifles are very well made kits that offer quality beyond anything else we had seen. The wood stocks, fit and finish were absolutely top notch.

Barry Giles from Airgun Gear Show

Daystate


Our next stop was over to the Crosman booth where we were kindly greeted by their friendly and knowledgeable staff that were happy to answer questions. I spoke with them about several new rifles such as the Wildfire and the New regulated Marauder field target.

Benjamin Wildfire

The Wildfire is essentially a PCP version of the 10/77 repeater that uses the same trigger and magazine system, but with the addition of a 2000 psi air reservoir. With a low fill up to 2000 psi it is perfect for those looking for a great gun to pair with a hand pump and at a reported 60 shots of .177 caliber pellets. The Wildfire is really going to be a good bridge gun that may bring PCPs into the mainstream market. The SBD system is Crosman’s new silencer design, which allows for an oversize baffle and maximum volume in the chamber without obstructing the shooter’s field of view.

Benjamin SBD system

This will be applied to all of the Gen3 Nitro Piston guns and we think the real reason for the design may have been to solve the cracking issues with the shroud on the older models. We really see no change in the performance of the gun by adding the SBD system other than cosmetics, strength and possibly sound of the break barrel.


Our next stop was to the GAMO booth where we were a bit surprised to not be greeted by anyone, we did spy on the new Swarm Maxxim “repeating” break barrel though.

GAMO Swarm Maxxim

The rifle is a 10 shot repeater that uses a rotary magazine that’s inserted into a slot in the top of the rifle. Each time the rifle is cocked it indexes the magazine and loads the pellet into the breech.

GAMO Swarm magazine loading port

GAMO Swarm rotary magazine

This is a great call by GAMO to create a repeating piston gun but would have loved to see it made as a side-lever design instead of a break barrel. The rifle really isn’t much different than any of the other models as far as overall power or performance, the new barrel design is a bit robust and obviously resembles a large caliber center-fire rifle.

Gamo

The great thing about the Shot Show is to see such a wide variety of Airguns and to find the good and bad in all of them.


The next booth we visited was BEEMAN where we immediately drawn to the new QB-78S synthetic stock rifle.

Beeman QB78S rifle

The QB-78S is an updated synthetic stock version that is designed to allow the use of a bipod, flashlight or laser. The gun is not changed other than the stock and may offer a little more versatility to some of you tinkerers. These QBs are great little guns for the money and no doubt will continue to be top sellers to the entry level and veteran Airgunners both.


After a little more browsing we made out way to the EVANIX booth where we were kindly greeted by Siyoung Lee the managing director of EVANIX. He was happy to show us all of the great guns they had on hand including the new very lightweight semi-auto bullpup.

EVANIX bullpup

The new semi-auto models use recycled blowback to automatically cycle the magazine and load the pellet. Evanix will be the first to incorporate recycled blowback into a modern tactical design.

Evanix bullpup

These new rifles are extremely lightweight and shoulder very well with great fit and finish. The innovation that goes into these guns is very advanced and no doubt is a stepping stone for many other companies in design. The REX pistol was a very neat little gun that looks to offer many features that any small game hunter would be really happy with.

Evanix REX pistol

Overall I have to say that EVANIX has really hit the market this year with some serious innovative products that I think unfortunately were overlooked by a few other hypes. We however will have our eye on them and hope to report some further reviews down the road.


Our next stop was a visit to see the new KRAL ARMS line of rifles that are newly imported from Turkey. These are the Puncher Breaker bullpups that are a bit crude in overall appearance but do offer some good features in .177/.22/.25 calibers.

Kral Arms puncher breaker

Some of the rifles are very sharp looking and the wood looks like fair quality for the price these rifles are going for. The one thing we noticed about the Puncher Pro model was its similar design cross between several guns such as Daystate, Evanix and Hatsan.

Kral Arms Puncher Pro

Kral Arms rifle

The overall fit and finish of these guns is not super and feel like the want of comparing it to a very very nice Hatsan. The Puncher EVO does have some nice bling to it along with some very pretty wood stock designs. I think we will be seeing a ton of these rifles in the next year and can see Kral Arms being a great competitor to the Airgun market.


Our next stop was to check out the Ataman line of rifles that too have been a fairly new import from Russia. They were originally known for building high quality Olympic rifles and have carried the tradition of bringing some new age technology into these rifles. The M2R bullpups and compact rifles are pretty sharp looking and offer some fairly impressive performance. All the models offer built in picitany rails along with good sturdy stocks offered in wood and synthetic.

Ataman M2R

Ataman M2R synthetic stock

The Ataman’s are high end guns but can see some improvement in making some of the edges a little less sharp. The side-levers and magazines are top notch and look as though they have been made to perform and last. These guns are hunters and have a great reputation for being built by the people who use them.


Our next stop was the Hatsan booth where we were very kindly greeted by the ever knowledgeable Cecil Bays from the popular YouTube channel AirGun Scout

Hatsan rifles

Cecil was happy to show us several of the many new models and we were able to get all the information we needed from someone who uses every single model. The newest model is the Bullmaster, a semi-auto bullpup that comes in .177 and .22 and has a 500cc bottle that offers a good amount of shots. The guns semi-auto operation is completely air operated and supposedly is a much more reliable and efficient way in design than some other kits offer.

Hatsan Bullmaster

The gun is very heavy as much all Hatsan’s are, still we can give credit for some creativity in design. The new magazines are surprisingly very well made and all seemed to fit very well.

Hatsan Bullmaster magazine

The Nova may have been a favorite as far as looks but have to say that its very hard to get around the weight of these guns. We think Hatsan needs to lower the overall weight of these guns and spend some more time on the finished metal.

Hatsan Nova

Most of the guns were all very robust and had some design features that are really difficult to make sense of. The fact that Hatsan is putting out so many new affordable models is great in the sense it offers something for almost any application. If Hatsan spent some more time on one rifle and raised the quality of the materials and QC we may see a huge step up because they do have the capability. Will they do it is the question?


The next stop through our massive wave of people was the UMAREX booth where we planned to look at two new models that have really been turning some heads. The first gun we looked at was the Umarex Gauntlet entry level PCP that is planned to retail for $300, a great value for the money.

Umarex Gauntlet

The gun will be offered in .177 and .22 and features a 13-cu regulated Ninja bottle that fills to 3000psi and can easily be filled with a hand pump. They claim 60 shots at 900 fps in .22 and 70 shots in .177 at 1000 fps. The magazine is near identical to the Marauder and self indexes each time its cocked.

Umarex

The comb is adjustable that is a very nice feature along with a shrouded type barrel that is claimed to quiet the gun considerably. The only thing that would have made this gun better would be picitany rail instead of the dovetail. Overall this looks to be a winner of a rifle and tough to beat for the money. The next gun we looked at was the new .50 Hammer that is very boldly claimed to achieve 700 fpe in a 3 shot repeater “pump action”.

Umarex Hammer

This rifle is no doubt very innovative but still very skeptical to being able to achieve the power level claims. ” The Umarex Hammer is a 700 ft. lb. 50 caliber PCP rifle in a compact configuration that will shock airgun hunting enthusiasts with its innovative approach of packing multiple shots with lots of power into a modern and rugged rifle that’s easy to carry and use.” ?? We are definitely shocked. The gun uses a stripper type magazine that moves to the side to load each slug into the chamber.

Umarex hammer magazine

The gun was showcased with a new Umarex ARX ammo that is essentially a sabot type that’s popular in the muzzle-loading world.

Umarex ARX

The Umarex staff was not able to answer many questions such as ammo weight or air capacity for this rifle. The barrel looked to be near 48″ long with some sort of carbon fiber sticker type wrap on it.

Umarex hammer

The thin walled, untensioned barrel may prove to be a serious problem with harmonics when producing 700 fpe. When asked about accuracy the quote was 2″ at 50 yards, good enough for a hunting gun?….The gun looks as though it may be using a large plenum that is housed somewhere near the back of the buttstock that may explain its ease of cocking. A heck of a hammer spring would normally be needed to put out such high numbers. The best guess is this gun may produce high numbers but with only one shot and several using a lightweight conservative slug. The gun does have a curb appeal that includes AR furniture, picitany rails and a fairly lightweight to it. Without seeing more than just a few prototypes we can really only speculate on weather or not the hype is all true or if its just a brilliant way to achieve some much needed publicity. Umarex did bring a good show and does look as though it has created a winner with the Gauntlet model.


Our last visit of the day was to Predator International where we met and talked to Richard Dixon.

Predator International

Richard showed us a few of his new lead free GTO line of pellets that look as though they are a great step in lead free technology. We are a California based company where many of our hunting areas may soon require a lead free alternative due to changing laws. Predator International is on top of the game in providing exceptional products for hunting and target practice.

predator international

We helped ourselves to a few stickers and had a good chat with Randy over at RL Airgun Supply  who seemed like a great guy who enjoyes the sport to its fullest.


The 2017 Shot Show was a great visit and found it as a valuable tool in being able to interact with the companies on a more personal level and to see the faces behind the media that promotes them. The goal for this trip was to make some connections and to try to share some serious truth as to what was seen in the light. All that was mentioned is just our own opinion and applied using the best facts that could be gathered, hopefully it can be taken as helpful.

, ,

SLAYERS MEET THE HIGH DESERT

Hey guys, I had another great weekend with the American Air Arms Slayer. SteveO was finally able to get loose for a few hours Saturday morning to do some hunting with me. We started our drive to the desert at 5:00 am and arrived at sometime after 6:15 to a new spot that I had previously scouted several days before. I had brought two .357 bull-pups with one being the titanium tube long version with the shorter one being the more compact tactical version.

.357 slayer

SteveO was happy to be able to get out and do some filming and to do some shooting with the Slayer. We filled the guns and loaded the mags with some 125 grain pellets that I personally love in the gun, they are accurate and move fast at over 1000 fps. SteveO and I walked several miles into the sunrise looking for the amber ears and possibly some coyotes as well.

hunting with the slayer

The area was slow but did offer a few shots on some running jacks at over 150 or so yards. We soon spotted some small golden mantel ground squirrels that in the wind offered quite the challenge. We shot a few of them capturing the overkill on video, should be fun to see once its edited. By this time it was near 8:30 am as we moved back to the truck for a break and to refill the guns with air and pellets that had been provided by John from Pelletgarden.com. SteveO took quite a few shots with his gun that was equipped with a Leapers Accushot and an offset mounted dot sight that proved to be a pretty cool setup for long and short ranges.

.357 slayer

His reaction to the gun is that it felt similar to shooting an AR-15 but without the noise. He also couldn’t believe how FAST the pellet can get out to 100+yards. We continued the same loop as before, walking slowly and stopping frequently looking for any movement. As we were talking a Jackrabbit sprung up from a bush several feet away from me, by the time I raised my gun as he was at full sprint at 60 yards, lined up less than a foot in front of him and THWACK….He flung down and tumbled to a stop. The entry was through his buttox and most likely made its way through most of the body.

.357 slayer jackrabbit kill

Cant wait till the video is done to see again in slow motion, taking a running shot with an air rifle is something I would not attempt with many guns. The Slayer performs like a dream and the more I shoot it the more I love it. The problem is the gun may have ruined it for me, after shooting it, everything else seems like a cap gun. SteveO and I made our way back to the truck and moved to a different location, this area provided more long range view. We hiked to the high point of an area that offers great line of sight and more of an open area to spot movement. We soon spotted another Jackrabbit hopping at 150 yards, lead the shot ahead of him and fired…..THUNK…missed by what looked like not much with a huge plume of dust kicked up…That gun truly is a powerhouse, amazing how quick that pellet gets to the target after trigger is pulled. The day had ended and certainly didn’t leave us without any excitement. We will be doing some more hunts very soon along with something a bit different. Here is a link to SteveOs YouTube channel dreamhobbies where you can find the video of our hunt.

, ,

The American Airgun Revolution

The Airgun industry is flourishing here in the United States and many have called it the Golden Age for our sport. Many new manufactures are sprouting up across the states, some new and some that have been around for years. Over the past several years I have seen the market for airguns soar higher than before and with that comes ingenuity and growth. The European airguns have been on top of the high end market and I feel as though us Americans have just as much to offer as far as quality craftsmanship. My goal is to show that you don’t need to look overseas to find quality and performance, we have that right here at home.

In no particular order the first company I wanted to acknowledge here is Mac1 Airguns that has been around for over 80 years, 30 of those ran by Tim McMurray. The Mac1 legacy has set some tall standards for quality, craftsmanship and performance. Tim McMurray has earned a reputation for making accuracy and he could not be more pleased about that. “Pushing the envelope is what makes it all so fun I can hardly believe it has already represented three decades of my life as owner. I know how lucky I am to be able to compete with and build these fine airguns. It is icing on the cake I’ve shot fairly well for the last year. Enjoying these guns in a competition environment is exciting and satisfying.” I have gone to quite a few Airgun shows, competitions etc, and Tim is always just one who is always willing to give advice in hopes to help someone succeed.

The Hunter BR is the Ultimate Benchrest Airgun. Barrels are between 24 and 25″ long and all but the usable rifling at each end has been removed. The rear 6″ of this barrel is cut down to around .630″. It sports an American made 6 groove cut rifled barrel made
to Mac1 specs with 1 in 24 Twist Rate (Custom Twist Rates Available). If you wish to play with the Big Dogs you need to go with the good barrels or hope you find the 1 in a 100 barrels made to production standards that winds up exceptional. American barrel makers are the best in the world and we now have a number of them trying their luck in the AG arena. That is a very healthy thing for AG BR and AG accuracy nuts in general.The combination of ultimate build quality and great Airgun Barrel gives these fine rifles the kind of accuracy championships are made of. A plastic hard case is included along with the necessary bolt on parts to set the gun in a proper Bench Rest and bags. Tubes can be 24. 26, or 28″ long in black or clear. Accessories fill adapters and scope mounts are extra. You can have the base plate, tube plug, butt plate and receiver matching color in red, blue, clear or black. This configuration is an upright rifle that the action is inline and grip at Bottom Dead center with Scope rail at Top Dead center. This makes for a more conventional BR gun. Mac1 Airguns


The second company I want to discuss is Wicked Air Rifles, a company that has been around for awhile and too well known for tuning Marauder rifles. Travis Whitney and Jim Gaska have created the FLEX line of rifles that are proudly made in USA and have achieved a very unique market for hunters. I have watched and admired this company grow and explode in the market place as they have some very unique, user friendly rifles and pistols.

These guns are very sturdy looking and the frame is a single piece of aluminum that uses AR furniture. Each gun is hand assembled and tuned to customer satisfaction. Wicked Air Rifles pride themselves on service and will go above and beyond to work with the customers needs. These guns have a rail system that allows easy adjustment of accessories such as a bi-pod or go pro camera. It’s a side bolt design with retracting bolt to move out of air path. No bounce hammer and high flow valve. Changing springs and power adjustments are easy in that the average Joe can work on without difficulty.  The rifle can achieve 20-200 FPE  (depending on caliber selection) Adjustable power levels. Timney Calvin Elite 2 stage trigger group, Carbon fiber bottle, Fully floating Tensioned barrel. Made In The USA!!! Wicked Air Rifles


The next company that holds a special place in my life and too has given me a true look into the Airgun world is American Air Arms. They are mostly known for the Slayer Big Bore Bullpups and Rifles. Founded by Tom Costan, an engineer, avid airgunner, and airgun hunter with a love of all shooting sports. These PCP Airguns are completely and proudly made in the USA with nearly 100% American made materials! All parts (except barrels, grips and bolts) are engineered and manufactured in their own facility using state of the art CNC machining centers.  In-house manufacturing allows them complete control over the quality of they’re product. The designs always start from a clean slate and are never just another example of the industry standard. They are engineered to meet a specific vision, purpose, and performance goals before any chips hit the shop floor. When the vision and purpose are clear, the performance goals are analyzed and found to be reasonable and attainable, only then can the actual design begin. This philosophy is what makes their guns lean, clean and gives them the exceptional effectiveness, performance and purpose they are known for.

Some of the noteworthy features of the EVOL are: built in 25MOA, regulated, shrouded and tensioned Tj Enterprises barrel, integral moderator, indestructible side-lever action, 7-9 round magazine (depending on caliber), Match quality two stage trigger (adjustable in every way), and 100% made in the USA!  All calibers have “metal” magazines designed to accept polymags without modification. American Air Arms has described quality as: Excellence in engineering, reliability, precision, purpose and performance.  Quality cannot be obtained without understanding the limitations of manufacturing with modern technology; every American Air Arms Airgun is a combination of vision and technology combined with passion for old world craftsmanship.  An American Air Arms Airgun will exceed  expectations, provide exceptional service, pride of ownership and one that will be shared with future generations. American Air Arms


Our last company is RAW Rapid Air Weapons a company that has set a huge name for itself in quality and craftsmanship. Rapid Air Weapons LLC was formed in 2006 as a supplier of  Precision Air Rifle components and accessories, today they manufacture, as well as supply high quality components and products for the shooting industry from their factory using the latest in CNC multi axis machines. They take building rifles extremely serious, from very early on parts are inspected at each stage to ensure they meet expectations on quality. Throughout the building stages everything is hand inspected before being installed and assembled up into a finished rifle. Specialist tools and gauges check barrel alignment in relationship to the action and scope rail, if it doesn’t pass they’re strict tests it will not leave the factory.  Having over 28 years manufacturing and design experience at Theoben their company CEO Martin has the most experience in the business when it comes to Theoben Products, with this extensive knowledge gained over decades they are able to offer some great products.  Rapid Air Weapons has an impressive line of precision Air Rifles and products manufactured in the USA and an even more impressive collection of trophy’s and medals won by users.

This high power model comes regulated and fitted with a quick fill system with an incorporated pressure gauge, powering the HM1000 is a 480cc air cylinder and a high quality German match grade barrel, finished with an carbon fiber barrel sleeve and integral carbon fiber moderator or barrel weight where required, the rifle comes equipped with a multi shot magazine or it can be single shot loaded, machined into the action is a new style picatinny rail with 22 MOA to give the shooter added ability to zero at longer distances, both picatinny and weaver mounts will fit. The trigger is a fully adjustable sporting version of our TM1000 target trigger with an added safety catch, the stock is made from laminate or walnut and hand oiled for weather protection and fitted with an adjustable butt pad and stippled for a secure grip while in the aim. All aluminum parts are coated for protection and the internal components are hand finished, hammer and trigger parts are hardened and polished for extra smoothness in reloading as well as making for a cleaner firing cycle, the sidelever linkage and bolt have been hardened ready for a lifetime of work. Rapid Air Weapons


The four companies in this read are just my own hand picked example of whats available to the American consumer and shows we don’t have to go European to find quality. For myself I enjoy shooting all types of Airguns but over the past few years have learned I prefer the quality I can find at home in the USA!

 

 

 

 

 

 

 

 

, ,

2016 EXTREME BENCHREST

On Wednesday October 5th 2016 Doug Noble, myself and Tom Costan left the American Air Arms facility in Acton California to head out 7 hours into the Arizona desert. Our trip had not started as soon as we would have liked as our rifles had literally been just finished that morning setting us back more than 6 hours. I was very excited as this was my first widely followed Airgun event where I was sure to meet some very familiar faces. My goal was to do well in the Big Bore event and to hopefully place well in the small bore 75yard benchrest that was to be very challenging. We arrived in Arizona early that evening where we settled in and made sure we had all necessary components to compete the following morning. The next morning we piled into the van and made our way for some coffee before our arrival to the 2016 Extreme Benchrest event.

We pulled into the beautiful  Rio Salado Sportsman’s Club by 7:30 am where we were greeted by banners and an army of Airguns Of Arizona staff diligently getting the event ready.

img_6948-copy

img_6966

We made our way into the registration area where we were kindly greeted and given our time schedule that included a small bag of goodies along with an 2016 Extreme Benchrest T-shirt. Tom, Doug and I were excited to get some practice in before our 1st afternoon Big Bore event. We unloaded our guns, tanks and pounds of other shooting equipment to the nicely shaded shooting benches.

img_6954-copy

We were greeted by AoA’s own Kip Perow who later I found to be quite a great shooter in the Big Bore event. The man sitting was Ron from High Arc Hunting shooting the new Bushbuck .45 monster Big Bore rifle. Doug Noble set up his custom built .338 that he has spent many months preparing to shoot here.

img_6910-copy-copy

Other well known names such as Rossi Morreale (below) from the show American Airgunner were practicing for the event. Tom and myself had a great talk with Rossi and were impressed with his love for the sport and his sincerity in trying to make it grow.

img_6939-copy

As Tom and I set up our new guns for testing we had Micheal Wendt (below) the new owner of Airgun Nation forum come by to say hello and to check out our new guns. Micheal is a very friendly guy that had some very positive energy behind him and one I was glad to meet.

img_6981

I was having a great time trying out my new wood stock EVOL .30 while Tom was using the .30 TAC version. We were practicing with both of the American Air Arms .357 Slayers as well. For me it was quite the adjustment to switch between two completely different power levels. I was sighting in my .30 for the 75 yard event and my .357 Slayer for 200 yards.

img_6924-copy-copyimg_6908-copy-copyMy first event was the Big Bore 200 yard event where we were shooting at 4 military style targets, we had to make 5 shots onto each target. I was shooting horrible not only due to the wind but I had chosen the wrong scope for the application being a fixed parallax. After that disastrous event I headed over to have my Airtank filled where I was kindly greeted by Todd DeOrio (below) Airguns Of Arizona’s fill station expert. He was most helpful and very on his game as I had to visit him quite often over the next few days,never had to wait more than 5 minutes for a fill. Thank you

img_6907-copy-copy

The rest of the day we practiced some more and walked around in between checking out some cool guns and even spotting a few more well known shooters such as my friend Tim McMurray of Mac1 Airguns and former winner of the EBR.

img_6993

Food and refreshments were available all day long with a great shaded area with plenty of room to sit and chat. Precision Airgun was on hand with its mobile repair center as well as the onsite gunsmith.

img_6964  Day two for us was to practice till about 3:00 where we were to shoot our first 75 yard card.

img_6925-copy-2 I had still been dialing in my gun and practicing the best I could in the wind that didn’t seem too bad as of yet. Tom was shooting the best out of the three of us with his gun, ending with him doing fairly well on his card. I had made the mistake of not using my sighters as often as I should of, ending with me doing very poorly. (no need to post pic)

Day 3 we had or 2nd 75 yard card to shoot, all three of us were in the 3rd relay so we had a good portion of the day to practice. As I walked up to practice I saw another more familiar face such as Ted Bier.

img_6994

img_7003

As the time approached I was feeling confident in my gun and my ability to shoot it well. We all headed down to our lanes to set our bench and to start the 75 yard event. I thankfully used a rear lead bag that proved to work much better for me, good to learn for future competitions. The wind was not as bad as the previous day but was still a bit unpredictable for me. This time I used my sights as needed and filled my gun along with using sorted pellets. For me this was my personal best and was very pleased regardless of how I placed.

img_6920-copy-copy

img_6983As you can see, these are very small targets and very humbling when missed. Unfortunately as good as I had done this day my previous card had killed my chance to qualify for the 3rd card at 100 yards.

Day 4 started early for us as our Big Bore event started at around 8:00 where we would be shooting at 85 yards and 200 yards. I was pretty confident with shooting 200 yards but was a bit nervous of the 85 yards as I’m not used to having to hold under. Doug, Kip, Ron and Tom were all shooting great. That Bushbuck is a pretty amazing gun, Doug’s .338 is just plain radical.

img_6956img_6999

I had a bit of confusion with my 85 yard targets but in the end was very happy with a 2nd.

After the event we had nothing more to do till the banquet so we spent our time plinking with our guns and visiting friends. I was having fun offhand shooting the 200 yard silhouette while Doug was visiting the 550 yard silhouette with his custom .338. My good friend Jim Walton (below) from “Fun Birds Hunting” came by to visit and to do a bit of shooting with us.

img_6947-copyHad some more visitors from Chile “Patagonia Airguns” So nice to see people from all over the world, bringing some very nice airguns to compete with.

img_6958 img_6957My friend Steve Marsh (above) who lives in Arizona and came to keep us company and to show us some killer places to eat throughout the area. I cant wait to come back and do some hunting when time allows. The day was just about to and end with a few Thunderheads in the distance.

img_6991We headed down the road several minutes to a very upscale banquet hall that was overlooking a beautiful golf coarse. This is where we would have dinner, announce the winners and to draw for the raffle prizes.

img_7006Some very nice raffle prizes this year.

ham-raffleThe dinner was excellent along with coffee and dessert, and followed by the awards.

img_7007 Big Congrats to Ted for winning the $5000

ham-ted-wins

This year had so many amazing competitors,some that traveled from far away places. I see this event only growing stronger and I will say the future is in the young shooters. We all as airgunners need to focus on the progression and to try sharing this wonderful pastime. I want to especially thank the AOA crew for doing such a wonderful job and being so welcoming to me as this was my first year competing. I feel it was well worth the trip and can only help to do better next year. The 2016 Extreme Benchrest has many events that can fit just about any shooters needs. Next year I plan to compete in the American Field Target and Big Bore events. Anyone that’s wanting a fun,family friendly event,this is a winner. Thanks to all who participated. Results can be found here: 2016 Extreme Benchrest

.

.